Who has a media/sand blast cabinet?

[spasm3]

I will probably need a dryer either on the cabinet or between the compressor and cabinet. Would this suffice?

https://www.amazon.com/PneumaticPlu...s=airline+dryer&qid=1591561123&r

 

[P10crew]

Glass beads is the normal for blast cabinets.
That vise will come out of there like new. Perfect first project.

 

[Trav]

Originally Posted by spasm3
I will probably need a dryer either on the cabinet or between the compressor and cabinet. Would this suffice?

https://www.amazon.com/PneumaticPlu...s=airline+dryer&qid=1591561123&r


That should work fine, also make sure to bleed any water out of the compressor daily.
+1 on the glass beads.

 

[funflyer]

Originally Posted by Trav
Whatever you get use a wall mount vac with one of these, it will keep the vac filter clean and saves a lot of money.

https://www.homedepot.com/p/Dustopp...th-2-5-in-Hose-36-in-Long-HD12/302643445

The vac, same as the one HF sells. Parts and filters for this one will fit the HF.

https://www.eastwood.com/eastwood-dust-collection-system-for-blast-cabinets.html

https://www.harborfreight.com/blast-cabinet-reclaimer-kit-60739.html

Let me know if you need help setting this thing up with a cabinet, wall mount it not on the back as shown.



Wow!, great tip. I never knew there was such a thing, thanks. After seeing this I had to get one, but went with a different type. Removed the vac from the back of my Grizzly cabinet and mounted it to the wall while I was at it. Just finished it this morning so I won't get a chance to test it out until the sealant drys.