Originally Posted By: PimTac
Originally Posted By: burla
Very similar, all group 3 with no moly all 3.
Which oils are you referring to? Most if not all oils have moly in them. If you are talking about Supertech And Valvoline then you are wrong about this.
Yes, all 3 have moly now. Prviously, they did not, a few years ago.
http://www.pqiamerica.com/March2013PCMO/Marchsyntheticsallfinal.html but now they do.
Most oils have at least some moly. The measly 3 ppm seen in Shell Rotella T6 Multi-Vehicle 5W-30 is virtually zero, and not many oils shun moly these days.
Some have over 100 ppm, some over 200 ppm, and then others like Redline, TGMO, MGMO, and Zepro use truck loads of the stuff.
Originally Posted By: burla
pqia says all three brands have no moly either, synthetic oil.
pqia says
burla, Not a bad source of info, but a bit old. The old high-Na, no-moly formulas are gone with SN+ and dexos1 Gen2 LSPI requirements. A recent thing, so just check the more recent oil spectrographic results published by PQIA themselves, and on bitog.