Originally Posted By: TheLawnRanger
This is what I use. I appreciate the post.
you're most welcome..
Originally Posted By: Snagglefoot
Moly and Titanium are common in most D1G2 VOA’s I’ve seen.
oh so that's the new thing to do.. I'm liking both of them, kind of a best of both worlds.
Originally Posted By: SR5
Wow !!
With 60 ppm Moly, 30 ppm Titanium and ~ 200 ppm Boron, this is not the old Magnatec of a few years ago.
Zinc is a bit lower at ~ 700 ppm (your GTX UltraClean was ~ 800 ppm), but I assume the Titanium is doing the heavy lifting here, which the GTX didn't have.
Nice LSPI friendly detergent pack of both Ca (~ 1060) & Mg ( 715 ppm) in the Magnatec. The GTX UltraClean was all Calcium (2574 ppm)
Good to compare the two (GTX UOA Link)
https://www.bobistheoilguy.com/forums/ubbthreads.php/topics/4790207/
Thanks for the VOA
hey SR5, you're welcome for the post. thanks for comparing the two (magnatec and ultraclean). Yup the GTX never had any titanium.. I think the old formulas Edge had a little bit of titanium in there.
I was excited when I first heard (on here of course) about the new "recipe" for Magnatec, and for me it checks all the boxes! Have to see the UOA on this when I get done, someone else will probably beat me to it!
Originally Posted By: novadude
Thank you for posting. This is the oil I've been running in our 2016 3.6L GM V6 engines (My Colorado, and my wife's Lacrosse). Viscosity is a little thinner than the old Magnatec IIRC.
hey no problem, you're welcome. I thought everyone would like to know quickly what's in the new formula. I know I wanted to know! You're right it is a little thinner than it used to be, but that seems like all the dexos1 gen2 are like that.