Originally Posted By: OVERK1LL
Originally Posted By: jeeprnovru
Ill let you take some time to read that, because apparently you have trouble with reading comprehension, in the mean time i will go back to work defending our country and making a difference in society, while you do............whatever it is you..."do"
GOOD DAY
I thought you were a mechanic? (you referenced your shop in your first post in this thread) Now you are defending the country?
You must be Dos Equis!
BTW, I have no issue with reading comprehension. I'm using what is called objectivity, rather than blind faith, which appears to be the school of thought you subscribe to.
My shop yes.....i race and race allot...enough to have my own shop and be a reputable source for work from racers who arent so fortunate to have a life ect......get it???
And how is ALL the proof you have seen today "blind faith" im starting to think you are nothing more than a message board troll........i hope you are not that thick for your sake
and here is a little more for you:
Major Oil Refinery:
Ultraformer pump failing and would shut down unit production. Major brand Synthetic 32 changed to RP Synfilm 32 while operating (1 quart of oil). Vibrations, temperatures and noise reduced to where repair was no longer deemed necessary and pump remained in service for 2 more years.
$50,000 savings on pump repair
downtime avoided savings (greater than $100,000 per day)
Amoco Chemical:
high pressure reciprocating ethylene compressors
changed from competing synthetic oil to RP NGL-NS 460 in cylinders, packing and crankcase
machine utilization went from mid 60% to high 90% range
maintenance cost reduced by 50%
increased production valued at millions of dollars
Dow Chemical:
12,700 HP electric motor driving polypropylene extruder gear box
journal bearing temperature would exceed critical level (85°C) on high density product runs necessitating production rate cutbacks to remain operational
major brand synthetic oil 68 changed to RP Synfilm GT 68
bearing temperature decreased 6-8°C and never exceeded 78°C
production was increased by 18,000 lbs per hour
subsequently major brand EP gear oil in extruder gear box was changed to RP Synergy
3.1% energy savings valued at $22,105 per each 1000 hours operation
BASF Chemical:
10,000 HP A-C Acetylene Compressor
operating for over 4 years on common lube console with the same 3,500 gallons of RP Synfilm 32
frequent upsets introduce large volumes of water into system, which is regularly drained from the sump
after an upset caused the compressor to run in reverse, it was taken down for maintenance the oil drained from the sleeve bearing had over 25% water in it – yet neither the bearing or shaft showed any damage....
READ!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Just had to throw that in, gotta go do things that matter now seriously...