Recent Topics
Motorcycle coolant?
by maverickfhs
02/22/17 08:13 PM
Looking for the BITOG member with a Trasko
by OneEyeJack
02/22/17 07:40 PM
trans service 2015 malibu 6T40
by gabriel9766
02/22/17 07:18 PM
A most VEXING Dodge Ram Hemi... Coolant LEAK
by SumpChump
02/22/17 07:11 PM
Kendall semi-synthetic
by aztec12
02/22/17 06:11 PM
Valvoline VO-16 sliced and diced
by RichardS
02/22/17 05:30 PM
Summer or winter blend for storage?
by another Todd
02/22/17 05:17 PM
Service Pro M2222, 5,000 miles CUT OPEN
by car51
02/22/17 05:17 PM
Gaming rig refresh.
by SEMI_287
02/22/17 05:14 PM
Peak Green vs Zerex Green
by Need4racin
02/22/17 05:07 PM
Need input from everyone - Should I buy this?
by SirTanon
02/22/17 04:58 PM
PARTS PLUS PH-500, 6,000 miles CUT OPEN
by car51
02/22/17 04:55 PM
HASTINGS LF 641 CUT OPEN
by car51
02/22/17 04:45 PM
Is all Dexron VI created equal??
by Aerojoe
02/22/17 04:43 PM
Long term storage
by TurboFiat124
02/22/17 04:36 PM
Mal/Adware Hiding...
by sleddriver
02/22/17 04:28 PM
MC FL-400S, 3,200 miles CUT OPEN
by car51
02/22/17 04:25 PM
Aboutblank?
by Eddie
02/22/17 03:53 PM
Castrol (BP) is reluctant to provide PROOF
by Ed_Flecko
02/22/17 03:16 PM
Castrol magnatec 10w40 duration on chery A5
by Omar_Eltahan
02/22/17 02:58 PM
Newest Members
old_kodger, Eason111, Cuba, M54B30, killahurtz
60614 Registered Users
Who's Online
105 registered (aaronc7, Anthony, 2012AccentSE, 04SE, 13 invisible), 2116 Guests and 21 Spiders online.
Key: Admin, Global Mod, Mod
Forum Stats
60614 Members
66 Forums
261434 Topics
4312651 Posts

Max Online: 3590 @ 01/24/17 08:07 PM
Donate to BITOG
Page 1 of 2 1 2 >
Topic Options
#3429377 - 07/19/14 03:42 PM Not stopping when shifting into drive....
gregk24 Offline


Registered: 04/13/13
Posts: 4931
Loc: FL, USA
For instance: when you are backing out of a parking spot, and you throw it in drive without stopping all the way, I know many people do this every day without even thinking about it. I stop all the way when shifting into drive or reverse. What kind of damage is caused by this? I tell people its not good for your transmission to do this. The same people that do this rev there engine up in the winter to "warm it up". Can anyone give me proof this is bad to back up my statements?
_________________________
2012 Honda Accord EX-L K24z3
45,xxx miles
PPPP 0w20 / Fram Ultra

2014 VW Jetta SE 1.8T ea888
24,xxx miles
Castrol Edge 0w40 / OEM filter

Top
#3429387 - 07/19/14 04:08 PM Re: Not stopping when shifting into drive.... [Re: gregk24]
cknight49090 Offline


Registered: 01/25/14
Posts: 235
Loc: south haven mi
I don't do it has to be hard on trans input shaft ujoints or cv joints etc.

Top
#3429388 - 07/19/14 04:10 PM Re: Not stopping when shifting into drive.... [Re: gregk24]
Tdbo Offline


Registered: 08/18/09
Posts: 2832
Loc: Ohio
I used to have a boss that went through 3 transmissions in 80K on a 1976 Chevy van doing that. However he was proud(and bragged about the fact) that he had never had to put brakes on the same vehicle. After a group of us tried to explain that 1) that is what brakes were for and 2) brakes are cheaper than transmissions unsuccessfully, we figured that he was close enough for government work. Fortunately, he found his calling.
_________________________
2012 Honda Accord LX-P 84K
2008 Ford Mustang Pony Package Convertible 14K
2006 Honda Odyssey EX-L 74K
2003 Ford Ranger 3.0 Supercab 92K

Top
#3429454 - 07/19/14 05:27 PM Re: Not stopping when shifting into drive.... [Re: gregk24]
dave1251 Online   happy


Registered: 07/15/05
Posts: 8361
Loc: Maricopa, AZ
I doubt with it would hurt anything. My wife will not come to a stop before shifting into drive.
_________________________
make the inside of your engine oil cap white.
don't use.

Top
#3429459 - 07/19/14 05:32 PM Re: Not stopping when shifting into drive.... [Re: gregk24]
Silverado12 Offline


Registered: 02/26/13
Posts: 2255
Loc: Central Virginia
^^^Dangit I don't either. Never thought about it. No trans problems, though.
_________________________
12 Chevy Silverado ext. cab LS, 2WD 4.3 auto
15 Chevy Cruze 1LT auto
07 Harley Dyna Street Bob 96 c.i. 6 sp.
10 Mustang GT auto

Top
#3429467 - 07/19/14 05:42 PM Re: Not stopping when shifting into drive.... [Re: gregk24]
mcrn Offline


Registered: 11/30/05
Posts: 2995
Loc: FL
I have been told the transmission joints take a large part of the abuse. I also come to a complete stop.

Top
#3429480 - 07/19/14 06:08 PM Re: Not stopping when shifting into drive.... [Re: gregk24]
SuperDave456 Offline


Registered: 10/29/08
Posts: 2459
Loc: Dallas, Texas
My brother blew through 2 transmissions in 4 years doing that.

He thought it was fun.

Until our Father decided that he wouldn't pay for another transmission and he had to buy a car himself.

Very stressful to all kinds of components that are not designed for that.
Use the brakes. They exist for a reason.

Top
#3429501 - 07/19/14 06:42 PM Re: Not stopping when shifting into drive.... [Re: gregk24]
kwooten31 Offline


Registered: 07/09/14
Posts: 26
Loc: North Texas
Not sure if it hurts the tranny, but I never do it and often yell at the wife if I catch her doing it. To me just seems like it could damage the car..
_________________________
'01 Chrysler 300m 3.5L 120k
Rotella T5 10w30- Engine
Mopar Oil Filter
Valvoline ATF+4 - Tranny/PS
Master Pro GL-5 80w90 - Differential
Zerex G-05 Coolant

Top
#3429507 - 07/19/14 06:47 PM Re: Not stopping when shifting into drive.... [Re: gregk24]
jrustles Offline


Registered: 02/24/13
Posts: 2035
Loc: Ontario, Canada
Not too fast!

Remember, your output shaft will be spinning in the OPPOSITE direction when the FWD clutches and bands engage, meaning double the RPM differential.

I do this sometimes, very modestly and barely moving Thank goodness for the shock absorbing fluid coupling of the TC

NEVER FAST or in a loaded or heavy vehicle!!
_________________________
"No matter how paranoid or conspiracy-minded you are, what the government is actually doing is worse than you imagine" W.Blum

Top
#3429525 - 07/19/14 07:22 PM Re: Not stopping when shifting into drive.... [Re: gregk24]
demarpaint Offline


Registered: 07/03/05
Posts: 26808
Loc: NY
I cringe when people do that, it's like they're trying to stop a boat or something. I come to a complete stop, shift to N for a second and then into D or R depending what I want to do. I want all the load off the drive train before going from D to R, or R to D. Can it damage something? Probably over time it might, I'd rather not find out.
_________________________
God Bless Our Troops


Top
#3429538 - 07/19/14 07:36 PM Re: Not stopping when shifting into drive.... [Re: gregk24]
wirelessF Offline


Registered: 10/04/07
Posts: 1606
Loc: Oahu, Hawaii
On 4L60E's that means stripping/snapping the sunshell gear spline. It's a common weak point on these transmissions but it probably can be prevented by coming to a complete stop when shifting from R to D.

Top
#3429541 - 07/19/14 07:37 PM Re: Not stopping when shifting into drive.... [Re: gregk24]
supton Offline


Registered: 11/09/08
Posts: 10318
Loc: NH
I wouldn't be surprised if newer vehicles had programming/design so as to minimize damage. Well, at least until the warranty gives up anyhow.

Once in a while I'll get ahead of myself and do this. But since most reverse gears on manual transmissions aren't synconized it's a pretty fast reminder to come to a full and complete stop.
_________________________
2011 Toyota Camry, base, 2.5L/6MT, 130k, hers
2010 Toyota Tundra DC, 4.6L/6AT, 135k, ours
1999 Toyota Camry LE, 2.2L/4AT, 145k, his

Top
#3429586 - 07/19/14 08:22 PM Re: Not stopping when shifting into drive.... [Re: gregk24]
Shannow Offline


Registered: 12/12/02
Posts: 34953
Loc: Oz
In the earlier series of Holden COmmodore, one of the ads on the TV was a Commodore in a sandbox, and full throttle D/R swaps as the car started to move...was supposed to demonstrate the durability of the car I guess.

Funnily, they had two autos in those, the local Trimatic in the 6s and 253ci V-8...and the turbo 400 in the 308ci V-8)...I'm surmising that their videoed test was the latter.

Top
#3429604 - 07/19/14 08:45 PM Re: Not stopping when shifting into drive.... [Re: gregk24]
sciphi Offline


Registered: 03/24/07
Posts: 9989
Loc: Upstate NY
Do it on rare occasion very slowly in the Cruze since R is right next to 1st. No hill assist, so sometimes the car rolls back a good few feet before the pressure plate fully clamps.

Wife does it all the time to her Fit. I drain/fill the ATF yearly on that car.
_________________________
2013 Toyota RAV4 XLE
2012 Chevrolet Cruze Eco

Top
#3429636 - 07/19/14 09:23 PM Re: Not stopping when shifting into drive.... [Re: wirelessF]
artificialist Offline


Registered: 09/23/07
Posts: 8384
Loc: Florida
Originally Posted By: wirelessF
On 4L60E's that means stripping/snapping the sunshell gear spline. It's a common weak point on these transmissions but it probably can be prevented by coming to a complete stop when shifting from R to D.

I had a friend who worked at the local government fleet, and his experiences are the same as yours.

My father worked at another fleet, and said that as abusive as some people are about automatic transmissions, they treat manual transmissions far worse. Either the driver doesn't know how to handle one, or they just don't care.
_________________________
2010 Lancer Ralliart Sportback

Top
Page 1 of 2 1 2 >