I happen to have 2 sets of rotors I'm about to put on, NAPA Ultra Premium for the Toyota Corolla, and Raybestos 980032FZN from RockAuto for the back of the Honda Pilot. The Raybestos was ordered as an "Element3" rotor, but the packaging is devoid of such an "Element3" reference. The box title says Raybestos RPT on the box front.
The Napa UP notes that it is 100% Polymer coated, which is somewhat informative. The Raybestos box notes a "full Grey Fusion(tm) 4.0 coating" which is not so informative.
Both have a bar code stick with words "Made in China" and "Engineered in U.S.A." on them, only differing in the use of a hyphen on the NAPA UP.
The Raybestos box side is somewhat informative on the subject of pad material transfer. I will start another thread on that topic shortly.
The rotors appear to have the same kind of finish.
The Napa UP notes that it is 100% Polymer coated, which is somewhat informative. The Raybestos box notes a "full Grey Fusion(tm) 4.0 coating" which is not so informative.
Both have a bar code stick with words "Made in China" and "Engineered in U.S.A." on them, only differing in the use of a hyphen on the NAPA UP.
The Raybestos box side is somewhat informative on the subject of pad material transfer. I will start another thread on that topic shortly.
The rotors appear to have the same kind of finish.