This came off E120, had ~41hours/1year. Title says cut open, really hack sawed open, can is thick. Took some time and elbow grease. Coil compression spring is stout. The element is potted directly to the nylon/plastic shaft assembly. Looks to me like it could be an M&H Puro made element. The fins visible around element are not equally spaced, run narrower to wider around it. Supposedly holds ~.8qts oil. Enjoy.
The ADBV with a spring under it.
Baseplate, outer area shaft is inlet, center is the outlet and it's not real big. It has a check valve inside it to keep oil from draining when removed, I assume.
Put the head of a nail in outlet, perfect fit ~5/16"; Could release check valve which is deeper than nail head shown in pic. Adbv can be seen below.
Media with nylon backing. The nylon is tough.
The ADBV with a spring under it.
Baseplate, outer area shaft is inlet, center is the outlet and it's not real big. It has a check valve inside it to keep oil from draining when removed, I assume.
Put the head of a nail in outlet, perfect fit ~5/16"; Could release check valve which is deeper than nail head shown in pic. Adbv can be seen below.
Media with nylon backing. The nylon is tough.