Originally Posted by mrdctaylor
Thanks! Do you do anything specific or just kinda coat the gear?
Remove back wheel (12mm socket).
Remove the snap ring, then the washer, and pull the pinion gear off.
Give it a good cleaning, and apply a light coating inside and out.
Coat teeth on the gear on rear wheel while you're at it.
More isn't necessarily better, and just makes a bigger mess.
Reassemble and good to go.
If you're feeling lazy = Remove back wheel, wipe everything off.
Spray pinion gear and gear on wheel with your Lithium grease spray.
Spin pinion gear a few times, and replace wheel.