Looking for something I could use for all the hinges and moving parts on my floor jack. The main pivot is the only part on the jack that has a grease zerk. Otherwise everything else is a bit hard to grease without taking it apart. So a oil that can penetrate is preferable. I was thinking Triflow but maybe even gear oil? Come to think some friction areas are under quite a bit of pressure.
There is one part that is a bit like a roller rocker which is starting to see a bit of wear. It is connected to the bottom of the jack handle and pushes the pistons on the hydraulic cylinder to raise the jack. There was lots of factory lubrication there but it doesn't seem like it was working too well. Photos to showcase the wear.
There is one part that is a bit like a roller rocker which is starting to see a bit of wear. It is connected to the bottom of the jack handle and pushes the pistons on the hydraulic cylinder to raise the jack. There was lots of factory lubrication there but it doesn't seem like it was working too well. Photos to showcase the wear.