BOSCH - opened up - ADBV ?

Status
Not open for further replies.
Joined
Jun 11, 2008
Messages
133
Location
North Carolina, USA
This Bosch came off my 02 Impala. The filter and oil had. about 4K miles, oil was Valvoline syn blend, 5w30. Motor has 75k miles on it. I found a couple of holes in the ADBV, and I don't see how I would have done it when I opened it. I cut around the bottom with a dremel tool, being careful not to disturb the filter itself. I was not expecting to find that. The media part looked to be in good shape, although it is darker than I thought it would be. I don't know about any of these filters these days.
DSCN7477_zps259eae05.jpg

DSCN7479_zps726b946d.jpg

DSCN7474_zps2a87f90f.jpg
DSCN7475_zps307c9f63.jpg

DSCN7484_zpsa47585dd.jpg

DSCN7483_zps7249c88c.jpg

DSCN7469_zps32804cc8.jpg

DSCN7468_zpsb47d0d36.jpg

DSCN7466_zps522ccb41.jpg

DSCN7467_zpsff67df21.jpg

DSCN7491_zps0388dc80.jpg

DSCN7473_zpsc628545e.jpg

DSCN7473_zpsc628545e.jpg

DSCN7465_zpsaf30e855.jpg
 
The tears in the ADBV look to be where it gets pinched between the base plate and the media assy base end cap. Are there any sharp edges on the metal pieces in this area?

Looks good otherwise.
 
Not satisfied with just extra holes in the media, Puro made filters now feature holes in the ADBV too? Oh my word....
 
my guess would be incomplete/flawed when it came out of the mold and made it thu QC.

while they do seem like cut marks I find it hard to imagine when or where it would have gotten cut.... unless it was a purolator inside job
27.gif
 
Originally Posted By: KCJeep
Not satisfied with just extra holes in the media, Puro made filters now feature holes in the ADBV too? Oh my word....


Maybe they are trying to increase the flow rate of the filter.
grin.gif
 
No, I didn't pry it apart. I had it cut to where I could fold the base plate back and forth a couple of times, and it broke off. I didn't put anything in there to pry it open.
 
This engine is kind of noisy on startup no matter what oil, or filters I've used. It always makes a rattling noise for a little bit. AFter it gets past that, it runs very quiet.
 
Status
Not open for further replies.
Back
Top