^^ That is pretty clean oil with that low ash percentage.
The oil looks like it did fine but I can't help but notice that these ram's are copper shedder's based on this & BS averages. But you're still almost double the avg. You still have lower mileage so there's still some time for it to come down more. Thanks
That is great info! Your right & that is no problem on a copper wear basis.Their averages are based on a 6,000 mile interval, 4.5/k vs 4.9 is pretty close. The copper is usually from the oil cooler.
It's one of the last of it's kind already, having a cast iron block and multiport fuel injection. Hopefully it'll last a long time, already swapped the ECM and according to my editor I've modified 6 switches, 43 scalars, and 196 tables . Next on the list is a set of headers, maybe a cam down the road. Still running the auto stop/start and MDS .. it's not nearly as intrusive on the RAM as some of the other trucks I've rode in.non of the YouTube channels talk about the 5.7 anymore. I guess because its old, but that's always the one you want if you're going to keep it. they're probably about to kill it, so your truck will hold its value very well over the coming years.
The oil looks like it did fine but I can't help but notice that these ram's are copper shedder's based on this & BS averages. But you're still almost double the avg. You still have lower mileage so there's still some time for it to come down more. Thanks
When you Compare it to the Averages it doesn't look so bad...I couldn’t live with this engine and these Lab results showing so much metal in the oil.
I guess I’m spoiled by single digit wear numbers from all my vehicles even up to 12k miles on the oil in past cars.
You cut off their comments. Did they happen to say how many miles the Universal Averages are based on? That will tell you how you compare to typical results for this engine.
Eh, those comments are for entertainment only.You cut off their comments. Did they happen to say how many miles the Universal Averages are based on? That will tell you how you compare to typical results for this engine.
I agree for the most part. But the average miles for UA is kind of an important metric that will only show in the comments.Eh, those comments are for entertainment only.
The issue with UAs - we are not given information on the other samples, so we do not know if those values are derived from relevant examples.I agree for the most part. But the average miles for UA is kind of an important metric that will only show in the comments.
BS has that information somewhere. I can't remember where I saw it, but they say that they only use healthy samples for Universal Averages. I'm guessing that means samples with no flagged (bolded) results. I'll see if I can find that.The issue with UAs - we are not given information on the other samples, so we do not know if those values are derived from relevant examples.
That would be interesting to know.BS has that information somewhere. I can't remember where I saw it, but they say that they only use healthy samples for Universal Averages. I'm guessing that means samples with no flagged (bolded) results. I'll see if I can find that.
The issue with UAs - we are not given information on the other samples, so we do not know if those values are derived from relevant examples.
Found it. It was actually discussed in their podcast. Here is a Facebook link (you don't have to log in) that shows a transcript of the question and answer:That would be interesting to know.
They did, as covered in Post #4 the Universal Avg is based on a 6,000 mile interval.You cut off their comments. Did they happen to say how many miles the Universal Averages are based on? That will tell you how you compare to typical results for this engine.
Like those double digit lead numbers on that old CamryI couldn’t live with this engine and these Lab results showing so much metal in the oil.
I guess I’m spoiled by single digit wear numbers from all my vehicles even up to 12k miles on the oil in past cars.
Nice find! So, that does add more depth to those averages used from "reasonably healthy" engines. Great info.. Thanks!Found it. It was actually discussed in their podcast. Here is a Facebook link (you don't have to log in) that shows a transcript of the question and answer:
Key words were "reasonably healthy" and "not a wear-in sample".