Originally Posted By: harry j
Originally Posted By: demarpaint
Originally Posted By: harry j
The idle was runing at 600 RPM before and now it's at 750. I didn't do anything else except using the Amsoil AZO OW-30 oil that now has Moly.
I just added 1 oz (30 ml) Molyslip to the oil. I will run it for a while to see if i can detect any difference and then add another ounce.
I used a seasoning injecter to inject the Molyslip, it has a 30 ml capacity, quick and clean.
Was it you who posted the UOA that showed a possible coolant leak? If so I'd check for vacuum leaks too, they can cause issues with idle speed as well.
Yes, there is a small coolant leak. I can't be 100% sure, but the vacuum hoses are all in mint condition and I don't think there is a leak. Thankyou for your suggestion.
Its worth looking into
BTW I think moly is a great product. I use Lubro-moly, and I also coat bullets with powdered moly. It cuts down on copper fouling and keeps barrels a bit cooler. Good stuff!
Originally Posted By: demarpaint
Originally Posted By: harry j
The idle was runing at 600 RPM before and now it's at 750. I didn't do anything else except using the Amsoil AZO OW-30 oil that now has Moly.
I just added 1 oz (30 ml) Molyslip to the oil. I will run it for a while to see if i can detect any difference and then add another ounce.
I used a seasoning injecter to inject the Molyslip, it has a 30 ml capacity, quick and clean.
Was it you who posted the UOA that showed a possible coolant leak? If so I'd check for vacuum leaks too, they can cause issues with idle speed as well.
Yes, there is a small coolant leak. I can't be 100% sure, but the vacuum hoses are all in mint condition and I don't think there is a leak. Thankyou for your suggestion.
Its worth looking into