So I have run a quart of MMO about 300 miles in our 100+ degree heat, I don't get out of the house much as I work there.
And the lifter tick/ injector tick from the passenger side of my Ford F150 with 4.2 V-6 isn't sounding any better. I have another 2000 miles to go on this OCI, although I might change it out earlier. It has been a year on this Synthetic OCI, and I am getting close to the 7500 miles. It will be warm through November and probably into December, so I have time.
So I stopped by the Napa near work during lunch today and asked them to order some Lubro Moly MOS2 additive for me. I showed them the part number I got from Napa Online.
They said they stocked it and they began looking. First out came the Schaeffer's #132, I said I had some and would prefrer the Lubro Moly Additive.
I told them that they stock the 10w60 racing, and 5w40 Lubro Moly oil along with some German Transmission fluid that works with all BMW and Dextron III transmissions. Could they order some Oil Additive made by the same company?
After looking through the oil shelf and through the back they found the MOS2 Additive on the shelf that I walked by. Turns out that they got it in stock last week and I walked past it on the way into the store. I picked up 2 cans of the stuff.
After I am done with the current fill I will put some Lubro Moly in my F150 with the next OCI.
Perhaps that will clean up the tick I have.
Good to know they now stock both the Schaeffer's and the Lubro Moly.