Hi guys,
I have an upcoming job, an oil pan reseal, which requires for the bolts to be tightened to 8nM + 90-degrees.
All of the torque wrenches I've found, that will measure angle, carry a range of 10-100 ft/lbs...so that won't work.
Any ideas?
Thanks
I have an upcoming job, an oil pan reseal, which requires for the bolts to be tightened to 8nM + 90-degrees.
All of the torque wrenches I've found, that will measure angle, carry a range of 10-100 ft/lbs...so that won't work.
Any ideas?
Thanks