Mobil 1 x-ref for Wix

[wavinwayne]

Can any of you tell me what the corresponding Mobil 1 oil filter is for the following 3 Wix filters:
57035
51056
51348

Thanks in advance.

 

[mrsilv04]

Doesn't Mobil provide an on-line cross reference guide for their filters?

 

[wavinwayne]

Quote:

---

Doesn't Mobil provide an on-line cross reference guide for their filters?

---

If they do, I can not find it. Then again, I'm not real smart.

 

[mrsilv04]

This was all that I could find.

"Should you have additional questions about our oil filters, please phone our Oil Filter Hotline at 1-800-882-0890 for assistance. Hours are Monday to Friday,
7 am to 7 pm (Central Standard Time), and on Saturdays from 7 am to 5 pm (CST)."

For being such a pricey filter, this is really lame. You should call them and see if they can actually figure it out.

 

[Gary Allan]

M1102 - 51348

The rest aren't direct x'ref's

This is a PH3614 sized filter - a stubby 3/4-16 thread.
UPC Number: 765809570351
Principal Application: Various Lawn + Garden Equip w/ Briggs & Stratton Engines
All Applications
Style: Spin-On Lube Filter
Service: Lube
Type: Full Flow
Media: Paper
Height: 2.305
Outer Diameter Top: 2.923
Outer Diameter Bottom: Closed
Thread Size: 3/4-16
By-Pass Valve Setting-PSI: 8
Anti-Drain Back Valve: Yes
Beta Ratio: 2/20=20/41
Burst Pressure-PSI: 275
Max Flow Rate: 7-9 GPM
Nominal Micron Rating: 28

Gasket Diameters
Number O.D. I.D. Thk.
Attached 2.734 2.430 0.226

This too is a stubby 3/4-16 filter

Part Number: 51056
UPC Number: 765809510562
Principal Application: Various Lawn + Garden Equip. + Small Tractors w/ Kolher, Lister, Hatz, Kawasaki Engines
All Applications
Style: Spin-On Lube Filter
Service: Lube
Type: Full Flow
Media: Paper
Height: 2.707
Outer Diameter Top: 2.921
Outer Diameter Bottom: Closed
Thread Size: 3/4-16
By-Pass Valve Setting-PSI: 8-11
Anti-Drain Back Valve: Yes
Burst Pressure-PSI: 325
Max Flow Rate: 7-9 GPM
Nominal Micron Rating: 19

Gasket Diameters
Number O.D. I.D. Thk.
Attached 2.734 2.430 0.226

and, for that matter, so is the 51348

Part Number: 51348
UPC Number: 765809513488
Principal Application: Various Chrysler/Jeep (82-07), Various GM, Saturn (85-07), Lexus (90-07), Saab (67-07), Suzuki (86-02), Toyota (88-07), Yugo (86-89), Harley-Davidson, Various Lawn&Garden, Farm Equip.
All Applications
Style: Spin-On Lube Filter
Service: Lube
Type: Full Flow
Media: Paper
Height: 3.404
Outer Diameter Top: 2.921
Outer Diameter Bottom: Closed
Thread Size: 3/4-16
By-Pass Valve Setting-PSI: 8-11
Anti-Drain Back Valve: Yes
Beta Ratio: 2/20=21/37
Burst Pressure-PSI: 275
Max Flow Rate: 7-9 GPM
Nominal Micron Rating: 19

Gasket Diameters
Number O.D. I.D. Thk.
Attached 2.734 2.430 0.226


Hmmm ...wayne ..whaterudoin?

 

[wavinwayne]

"Hmmm ...wayne ..whaterudoin?"

Gary,
I ask because the 3 Wix filters I posted will fit my new John Deere mower. I figured since the oil is only supposed to be changed every 50 hours, I might use a Mobil 1 filter, which I personally consider to be a better filter than a Wix. Th edifference in price is not an issue, since this would be a once per year expense. My JD mower would probably never need an oil filter as good as a Mobil 1 filter, but that's why I asked.

 

[unDummy]

Mobil1 has a limited range of PN's.

If you have room, slightly longer, possibly some extra diameter, you should be able to find a good substitute for all those filters.

I would use the M1-102 in place of ALL three if there is room.

Since price doesn't vary much among sizes, if there is room the M1209 would be any extra long version.

 

[The_Champ]

All three WIX filters cross to the Mobil 1 M1-102. The filters you have are probaby all vary in height a little, but they all have the internal parts, gasket seal, and thread size so you can use the M1-102 to replace them all.