XG Fram no wire backing

[timtupper]

I won’t run this filter again. I ran the XG because they didn’t look like this before. Switched to Endurance this time.

2011 Cruze 1.4T
XG10246
Syntec 5w30
10,254 miles
Car has 249,577 on it

Replaced with FE10246
QS 5w30 UP

 

[dnewton3]

Other than wavy pleats, were there any signs of voids or something that would imply failure to filter?

 

[timtupper]

Other than wavy pleats, were there any signs of voids or something that would imply failure to filter?

I got pulled away by the grandkids. Going to take a close look under light later.

 

[fantastic]

Since this is a cartridge filter did you see the wavy media before installing?

 

[timtupper]

Since this is a cartridge filter did you see the wavy media before installing?

They aren’t wavy when new. And the old XG with wire backing never came out wavy.

 

[slacktide_bitog]

Was your OCI the one suggested by the OLM?

 

[timtupper]

Was your OCI the one suggested by the OLM?

Yes. Hit 0% Friday.

 

[Hall]

They aren’t wavy when new. And the old XG with wire backing never came out wavy.

What engine damage did it cause ?

 

[JavierH19]

Unless there was tearing or the seam or caps separated the waviness is just aesthetics. I believe that's why a lot of filters for German cars are in a zig zag pattern.

 

[CKN]

Wavy is a non-issue.

 

[RooflessVW]

Unless there was tearing or the seam or caps separated the waviness is just aesthetics. I believe that's why a lot of filters for German cars are in a zig zag pattern.

It's only a few MB and MINI filters, made by Purflux, and the zig zagging is to fit more media.

 

[bbhero]

Wavy is a non-issue.

Until…. It is.

When the waves rip…. Which can and does happen.

Not often to be fair.

But I’d rather have either…

A) synthetic blend media that actually looks very good, lots of filter media in it, zero waves in it, and very good efficiency.. Like Premium Guards or O Reilly’s Microgard Select, Federated Auto parts XL or

B) wire backed real full synthetic media that actually looks great EVERY time when one of them is cut open, very high efficiency and longevity.

Not welfare, food stamp, cheapo looking filter media that looks like hades and is prone to tearing if they don’t put enough of it in certain filters.

 

[bbhero]

Unless there was tearing or the seam or caps separated the waviness is just aesthetics. I believe that's why a lot of filters for German cars are in a zig zag pattern.

True…

But do real full synthetic wire backed media filters ever, ever, ever, ever had that problem ?

No. Because the OG real Fram Ultra and RP filters were much better constructed.

Now the Fram Endurance filter is filling that role. Pretty much a Royal Purple clone but at least it’s a very good filter for $12.98… Not too shabby.

 

[fantastic]

They aren’t wavy when new. And the old XG with wire backing never came out wavy.

Perhaps not this filter but I've seen many of these new frams that are wavy. We will be eagerly awaiting your experience with the Endurance. Do you plan to run it 10k also?

 

[ZeeOSix]

We will be eagerly awaiting your experience with the Endurance.

I should look pristine since it's wire-backed media, like the OG Ultras looked after use.

 

[fantastic]

I should look pristine since it's wire-backed media, like the OG Ultras looked after use.

Fingers crossed. I'm expecting nothing less out of the Endurance line. I will be heartbroken if I see a title "Torn Endurance" .

 

[UG_Passat]

It's only a few MB and MINI filters, made by Purflux, and the zig zagging is to fit more media.

And some VW's had Purflux origami filters

 

[Yourhomiematt]

What's the back side of media look like?

 

[timtupper]

What's the back side of media look like?

I don’t know. The experts here already determined there was nothing wrong so I threw it away.