Your uoa sheet says M1 AP, but the title says Honda factory fill. Is this the Honda factory fill or an oci of M1 AP? All that moly has me curious.
My apologies if I missed that info
Yes, you missed the info. The answer to your question is well explained in post #2 of this thread.
At 6,000 miles on my car, I washed my car and decided to check on all fluids in my car and top them. When I checked my oil level on my dipstick, it was just above halfway. So, my guess is they may not have filled it up all the way from factory. So, I decided I want my oil to show full on the dipstick. I had a brand new 1 quart bottle of M1 AP 5W20 laying at home.
So, I poured half a quart of the M1 AP 5W20 in the car. I checked the dipstick. It was slightly above the maximum line. So, that is how I left it until 12,034 miles on odometer when I sent the oil sample to Blackstone.
I told Blackstone that I added half quart of M1 AP 5W20 at 6,000 miles.
I made sure to provide this detail here so people are not confused thinking this oil run was on M1 5W20 AP.
I hope this clarifies things to you now.
My car takes 0W20. But what I added was M1 AP 5W20.
I currently have M1 0W20 Extended Performance and Fram XG filter, both rated for 20,000 miles in the car. But I am planning to do another oil change at 12,000 miles again and I will send another sample to Blackstone to see what they say.