Originally Posted by DrDanger
As we know from the main page/ Moly basics on here, the falling out of suspension issue should have been fixed a long time ago.
Hate to quote the "tests" is a soda bottle, where it goes back in suspension, but whats to say the thing on the bottom of the pan isnt plain sludge, especially on a higher mileage vehicle.
I found a few UOAs showing it in suspension.
Silver anti-seize could be moly or could be metal bits.
I do agree that the newer organo-moly complexes are better than MoS2. These are hard to find where I am...
Have seen enough good UOA's with MoS2, which is obviously in suspension to show on the sheet. Here is the first google result
https://www.bobistheoilguy.com/foru...flat&Number=2397032&#Post2397032
Happy Thanksgiving all !
A lot of good UOA's without it too. If you drive everyday and aren't concerned about the possibility some of it falling out and collecting in the bottom of the pan, by all means use it. Trav's engine had zero sludge in the pan, so that certainly wasn't the case. The purpose of this thread was to discuss the product, the good, the bad, and the ugly. That's what I'm doing. Yes happy Thanksgiving.