Originally Posted by 53' Stude
Originally Posted by LeakySeals
I used M1 HM 5w30 on my 2002 2AZ-FE but it was to help with leaks and bad valve seals not your problem. HM oil really makes no difference for your problem. HM oils are most effective for seals and rubber issues. If you're a 2007-2009 2AZ-FE with 60k+ miles, burning gobs of oil, its too late for thin high flashpoint synthetic oils. Its pull the pistons, drill out the holes, replace the pistons, sell the vehicle, or go with a thicker oil. Preferably conventional. You seem to like pennzoil products, use the yellow bottle in a 5w30, 10w30, 10w40 I bet its a whole lot better. No thin syn for that engine, causes more problems than it solves.
Ever since I replace the pcv valve on my 09' Camry, my consumption is 0. After this run of DELO XLE 10w30, I'm going to try QSGB or Chevron supreme or GTX 5w30 or 10w30
Tell me more about the Delo xle? I have 20 qts of 10-30 I was saving for my power stroke but have a Nissan consumption issue. I'm trying M1 HM, 10-30 and it's made it worse than 5-30.