Recently DIY'd the front end of our 07 Yukon Denali w/193k miles.
Changed:
New Inner and outer tie rods
New Upper control arm w/bushings and ball joint
New Lower control arm w/bushing and ball joint
New CV axles
New Bearing hubs
Painted rebuilt calipers
new pads, rotors & hoses
And soon I'll change the valley cover (VLOM), oil pressure sensor, and pulley w/new bolt & seal.
Changed:
New Inner and outer tie rods
New Upper control arm w/bushings and ball joint
New Lower control arm w/bushing and ball joint
New CV axles
New Bearing hubs
Painted rebuilt calipers
new pads, rotors & hoses
And soon I'll change the valley cover (VLOM), oil pressure sensor, and pulley w/new bolt & seal.
Last edited: