The moment most of you have been waiting for! Here is the virgin sample of the MolySlip E Oil Supplement found on the shelves of Crappy Tire.
Manufacturer: MolySlip
Product: MolySlip 'E' Oil Supplement 300ml Can
Date Processed: 08/21/2002
Chemical Lab: Hewitt/CAT - Montréal, Québec
Sample Status: New, never been used inside engine.
Sample amount: approx. 125ml
Numbers expressed are in parts per million (PPM) except for Viscosity:
Copper: 0
Iron: 50
Chrome/Chromium: 1
Lead: 0
Aluminum: 156
Silicon: 59
Molybdenum: 9069
Sodium: 17
Magnesium: 0
Tin: 0
Boron: 0
Nickel: 0
Zinc: 1975
Calcium: 4621
Phosphor: 1052
Potassium: 3
Water: NIL
Viscosity @ 100C: 22
Comments by Hewitt/CAT: "Iron, Aluminum, and Silicon are high for a new additive. We recommend you to refer to your dealer for a safe use of this additive in your engine."
There you go guys! I think the high amounts of Aluminum and Iron are strictly coming from the can that the additive came from. Unfortunately, it's hard to tell unless MolySlip re-markets this product using plastic bottles.
Here are some pics that I posted a while back:
Oil sample taken.
What do you think guys?
Regards,
Oz
[ August 21, 2003, 01:12 PM: Message edited by: Patman ]
Manufacturer: MolySlip
Product: MolySlip 'E' Oil Supplement 300ml Can
Date Processed: 08/21/2002
Chemical Lab: Hewitt/CAT - Montréal, Québec
Sample Status: New, never been used inside engine.
Sample amount: approx. 125ml
Numbers expressed are in parts per million (PPM) except for Viscosity:
Copper: 0
Iron: 50
Chrome/Chromium: 1
Lead: 0
Aluminum: 156
Silicon: 59
Molybdenum: 9069
Sodium: 17
Magnesium: 0
Tin: 0
Boron: 0
Nickel: 0
Zinc: 1975
Calcium: 4621
Phosphor: 1052
Potassium: 3
Water: NIL
Viscosity @ 100C: 22
Comments by Hewitt/CAT: "Iron, Aluminum, and Silicon are high for a new additive. We recommend you to refer to your dealer for a safe use of this additive in your engine."
There you go guys! I think the high amounts of Aluminum and Iron are strictly coming from the can that the additive came from. Unfortunately, it's hard to tell unless MolySlip re-markets this product using plastic bottles.
Here are some pics that I posted a while back:
Oil sample taken.
What do you think guys?
Regards,
Oz
[ August 21, 2003, 01:12 PM: Message edited by: Patman ]