Blackstone lab report 12-10-2010
0W-30 SSO
EAO20 FILTER
2X Filtermag SS300
Golden Eagle magnetic drain plug
Miles on vehicle 305,276
Miles on oil 4,892
Thank you for the note stating that the timiing belt tension was set too high, Since it has been loosened, that could have been the cause of excess lead (from bearings) we found last time. Lead has settled down and all other wear metals look good, showing properly wearing mechanical parts inside your engine. The viscosity was a touch low for a 0W/30 oil. An acceptable amount of fuel dilution was also present. The TBN showed plenty of additive remaining in the oil at 5.9. The ISO Cleanliness code was 16/15/13, clean for hydraulic fluid. Nice report!
Aluminum...3 PPM
Chromium...1
Iron...10
Copper...4
Lead...1
Tin...0
Molybdenum...1
Nickel..0
Manganese...0
Silver...0
Titanium...0
Potassium...13
Boron...7
Silicon...15
Sodium...9
Calcium...3682
Magnesium...14
Phosphorus...669
Zinc...695
Barium...0
SUS Viscosity @ 210 F...57.3
cSt Viscosity @ 100 C...9.45
Flashpoint...365
Fuel % 1
Antifreeze...0
Water %...0
Insoluables... 0.3
TBN...5.9