Amsoil EaO15k19 Used Media Pic's

Big E

Site Donor 2023
Joined
Dec 29, 2020
Messages
144
Location
CA
'20 Jeep Grand Cherokee 36K miles on vehicle. 8K miles on oil and filter. Oil was Amsoil SS 5w30. Previous Oil was Amsoil 0w20 since 3K miles.

Seems to me to be a lot of fine metal particles. Paranoid I'm getting the dreaded camshaft failure.

Unfortunately I did not do a UOA on this change. Previous change was analyzed and showed nothing abnormal.
 

Attachments

  • KIMG20230915_01_BURST20230915111552_COVER.JPG
    KIMG20230915_01_BURST20230915111552_COVER.JPG
    362.3 KB · Views: 74
  • KIMG20230915_105748778.JPG
    KIMG20230915_105748778.JPG
    285.2 KB · Views: 81
  • KIMG20230915_105721855.JPG
    KIMG20230915_105721855.JPG
    164.9 KB · Views: 77
  • KIMG20230915_113104081.JPG
    KIMG20230915_113104081.JPG
    318.1 KB · Views: 77
  • KIMG20230915_113153871.JPG
    KIMG20230915_113153871.JPG
    134.4 KB · Views: 72
Unfortunately I did not do a UOA on this change.
A UOA probably won't have much of an up-tick. It can only measure particles that are 5-7 microns or less. The particles in the filter media would never be seen by a UOA.
 
That is some chunky flecks! Darn it! Maybe another UOA in the future could shed some light on what the situation is.
 
3.6L Pentastar PUG.

The flecks were shining in the sun, I believe the camera exaggerated them a bit as hot spots against the dark background. They are there though.

I would expect to see metal like this in a new engine, but not one with 36k on it.
 
Back
Top