Recent Topics
Michelin 7% Price Increase Effective 3/16/20
by Egg_Head - 02/19/20 03:58 PM
GunsInternational
by Yah-Tah-Hey - 02/19/20 03:39 PM
400hp VW Arteon confirmed for 2021
by wemay - 02/19/20 03:11 PM
redline 75W140
by mobilaltima - 02/19/20 02:50 PM
brake flush, upgrade to dot 4 or stay with dot 3
by apollo18 - 02/19/20 02:49 PM
I'm hoping it is the battery. 2016 Camry
by andyd - 02/19/20 02:48 PM
New Zoro 20% off $75 or more
by bullwinkle - 02/19/20 02:24 PM
New platinum beta ratio?
by mpgo4th - 02/19/20 01:40 PM
Lubrizol GF-6 Video Interview w/ Martin Birze
by ARCOgraphite - 02/19/20 01:31 PM
2008 GMC Sierra - AMSOIL SS 5w30 - 5300~ miles
by Samrsnow - 02/19/20 01:23 PM
Factory Ford filter cut open
by mpgo4th - 02/19/20 01:01 PM
VW coolant G12+ compatable G12++
by raaizin - 02/19/20 12:27 PM
Fun Electrical Gremlins with the Jeep
by Miller88 - 02/19/20 11:59 AM
Checking inner CV joints on fwd
by ram_man - 02/19/20 11:39 AM
AIR FRANCE FLIGHT 296
by 53' Stude - 02/19/20 10:51 AM
Brakes failing randomly
by Avery4 - 02/19/20 10:28 AM
Reliable Brand Washer / Dryer
by diyjake - 02/19/20 10:05 AM
Royal purple oil filters have gone downhill?
by Sprite - 02/19/20 09:25 AM
Meguiar's Ceramic Wax, $13.97 @ Wmart
by wemay - 02/19/20 09:23 AM
2015 Forester - whine/Rough at specific RPM
by MoneyJohn - 02/19/20 09:06 AM
Newest Members
Antherzoll, mmahaley, Butterfly, TorchHypnosis, Tgibson
70751 Registered Users
Who's Online Now
111 registered members (92saturnsl2, 53' Stude, 94astro, 2003f7, 1978elcamino, 9 invisible), 2,350 guests, and 28 spiders.
Key: Admin, Global Mod, Mod
Forum Statistics
Forums67
Topics301,660
Posts5,200,121
Members70,748
Most Online4,538
Jan 20th, 2020
Donate to BITOG
Print Thread
Hop To
Removed valve cover, need to move car change oil? #5332064 01/25/20 05:23 PM
Joined: Dec 2015
Posts: 672
M
mazdamonky Online Shocked OP
OP Online Shocked
M
Joined: Dec 2015
Posts: 672
So my protege started making noises which appeared to be due to the timing belt cover coming loose and contacting one of the pulleys. After removal, which required removing the valve cover, I found the timing belt tensioner pulley failed. This means I need to do more work than intended. Normally, after removing the valve cover I would do an oil change, however, I need to move the car about a block to my garage from my parents house so I can do the timing belt job next week. Should I change the oil and change again after the timing belt, or should I just move the car and do the oil after the timing belt?


2018 mazda3 hatch 2.5 26148 miles
1985 rx7 1.1 100k miles
2002 protege 236k miles
1985 rx7 with a 5.0 swap
2020 corolla 750 miles
4 more running cars in yard not mentioned
Re: Removed valve cover, need to move car change oil? [Re: mazdamonky] #5332078 01/25/20 05:38 PM
Joined: Apr 2010
Posts: 3,953
A
atikovi Offline
Offline
A
Joined: Apr 2010
Posts: 3,953
Originally Posted by mazdamonky
Normally, after removing the valve cover I would do an oil change


Why? Is it due for one?

Re: Removed valve cover, need to move car change oil? [Re: mazdamonky] #5332086 01/25/20 05:49 PM
Joined: Mar 2015
Posts: 14,610
53' Stude Online Content
Online Content
Joined: Mar 2015
Posts: 14,610
Wait til repairs are done then change oil.


2009 Toyota Camry LE

161,669 miles

Valvoline Maxlife Synthetic 5w20 Dexos 1 Gen 2 SN+
Fram tough guard 4386 filter
Re: Removed valve cover, need to move car change oil? [Re: mazdamonky] #5332097 01/25/20 05:59 PM
Joined: Sep 2009
Posts: 2,298
B
BigCahuna Offline
Offline
B
Joined: Sep 2009
Posts: 2,298
Slap the valve cover back on and drive it a block. Do what needs to be done with new gaskets , then change the oil if needed. Try not to over think it.,,,

Re: Removed valve cover, need to move car change oil? [Re: 53' Stude] #5332107 01/25/20 06:07 PM
Joined: May 2010
Posts: 11,043
S
spasm3 Offline
Offline
S
Joined: May 2010
Posts: 11,043
Originally Posted by BigCahuna
Slap the valve cover back on and drive it a block. Do what needs to be done with new gaskets , then change the oil if needed. Try not to over think it.,,,

Originally Posted by 53' Stude
Wait til repairs are done then change oil.


+1


13 elantra 81k 5w30 synpwr
03 chevy avalanche 83k synpwr 5w30
17 mazda cx-5 17000 miles synpwr 5w30
Re: Removed valve cover, need to move car change oil? [Re: mazdamonky] #5332189 01/25/20 07:45 PM
Joined: Mar 2014
Posts: 4,427
L
Leo99 Offline
Offline
L
Joined: Mar 2014
Posts: 4,427
I've never connected removing the valve cover with changing the oil. I don't understand the connection.


Without data you're just another person with an opinion. W. E. Deming

2003 Corolla 250,000 miles (RIP)
2004 Corolla 125,000 miles
2004 Rav4 392,000 miles
2015 Camry 90,000 miles
Re: Removed valve cover, need to move car change oil? [Re: Leo99] #5332209 01/25/20 08:06 PM
Joined: Dec 2015
Posts: 672
M
mazdamonky Online Shocked OP
OP Online Shocked
M
Joined: Dec 2015
Posts: 672
Originally Posted by atikovi
Originally Posted by mazdamonky
Normally, after removing the valve cover I would do an oil change


Why? Is it due for one?


Originally Posted by Leo99
I've never connected removing the valve cover with changing the oil. I don't understand the connection.


My understanding has always been removing the valve cover introduces extra contaminates to the top of the engine/engine oil and oil should be changed.

It is about due for an oil change. Its been around 8000 miles since I last changed oil. It burns a quart at an average of 1k miles depending on driving. Mostly changing to change the filter. Probably doing a valve seal job while I am in there to try to reduce the oil burn.


2018 mazda3 hatch 2.5 26148 miles
1985 rx7 1.1 100k miles
2002 protege 236k miles
1985 rx7 with a 5.0 swap
2020 corolla 750 miles
4 more running cars in yard not mentioned
Re: Removed valve cover, need to move car change oil? [Re: mazdamonky] #5332213 01/25/20 08:08 PM
Joined: Aug 2017
Posts: 1,198
D
Dave9 Offline
Offline
D
Joined: Aug 2017
Posts: 1,198
Change the oil then hook it up to a donkey to pull to your place, then change the oil, then have donkey pull it to your place, then change the oil, then unhook the donkey, then change the oil, then send the donkey home then change the oil then do the timing belt then change the oil.

... or just move it home, do the timing belt, then change the oil once since it only needs it once. smile

Last edited by Dave9; 01/25/20 08:10 PM.
Re: Removed valve cover, need to move car change oil? [Re: mazdamonky] #5332247 01/25/20 08:47 PM
Joined: Apr 2010
Posts: 3,953
A
atikovi Offline
Offline
A
Joined: Apr 2010
Posts: 3,953
Originally Posted by mazdamonky
Originally Posted by atikovi
Originally Posted by mazdamonky
Normally, after removing the valve cover I would do an oil change


Why? Is it due for one?


Originally Posted by Leo99
I've never connected removing the valve cover with changing the oil. I don't understand the connection.


My understanding has always been removing the valve cover introduces extra contaminates to the top of the engine/engine oil and oil should be changed.


Well, I usually wash the engine before pulling the cover, but anything that falls on top of the engine isn't coming out with that oil change anyway.

Re: Removed valve cover, need to move car change oil? [Re: Dave9] #5332350 01/25/20 11:09 PM
Joined: Mar 2018
Posts: 1,564
T
TheLawnRanger Online Content
Online Content
T
Joined: Mar 2018
Posts: 1,564
Originally Posted by Dave9
Change the oil then hook it up to a donkey to pull to your place, then change the oil, then have donkey pull it to your place, then change the oil, then unhook the donkey, then change the oil, then send the donkey home then change the oil then do the timing belt then change the oil.

... or just move it home, do the timing belt, then change the oil once since it only needs it once. smile

This is the only reasonable solution.


2011 Impala
2012 Colorado
Oil: 5w30 synthetic
Filters: Wix 51522 for both
Re: Removed valve cover, need to move car change oil? [Re: BigCahuna] #5332371 01/25/20 11:44 PM
Joined: Jun 2003
Posts: 20,263
C
Chris142 Offline
Offline
C
Joined: Jun 2003
Posts: 20,263
Originally Posted by BigCahuna
Slap the valve cover back on and drive it a block. Do what needs to be done with new gaskets , then change the oil if needed. Try not to over think it.,,,

This. Then run it with the old oil and filter to allow the filter to pick up any contaminants then change the oil and filter.


02 Wrangler Napa high milage 10w40
87 F250 Valvoline 15w40
07 fjcruiser Car lube plus 10w30
Z400 castrol T 10w40
Can am Maveric edge 5w40
57 case tractor Chevron sae30
Re: Removed valve cover, need to move car change oil? [Re: mazdamonky] #5332587 01/26/20 09:58 AM
Joined: Aug 2018
Posts: 162
M
mpack88 Offline
Offline
M
Joined: Aug 2018
Posts: 162
Just put the cover back on and drive it where you are changing the belt. Its not going to hurt a thing. Unless your belt comes off due to the failed tensioner.

Last edited by mpack88; 01/26/20 09:59 AM.
Re: Removed valve cover, need to move car change oil? [Re: BigCahuna] #5333588 01/27/20 10:59 AM
Joined: Jan 2013
Posts: 3,628
W
WyrTwister Offline
Offline
W
Joined: Jan 2013
Posts: 3,628
Originally Posted by BigCahuna
Slap the valve cover back on and drive it a block. Do what needs to be done with new gaskets , then change the oil if needed. Try not to over think it.,,,

Yep .


Wyr
God bless
Previous Thread
Index
Next Thread

BOB IS THE OIL GUY® Powered by UBB.threads™