Rather than hijacking the other penetrating oil thread, I'll just start fresh.
I've always used PB Blaster and it visually doesn't look oily a day or so after application. At that rate, I am not sure if it's actively penetrating anymore.
I've always had decent luck with PB Blaster, but is there anything out there that's better? I also wonder if mixing ATF at a ~25% ratio would help allow the penetrating oil to stay on the parts longer.
I've always used PB Blaster and it visually doesn't look oily a day or so after application. At that rate, I am not sure if it's actively penetrating anymore.
I've always had decent luck with PB Blaster, but is there anything out there that's better? I also wonder if mixing ATF at a ~25% ratio would help allow the penetrating oil to stay on the parts longer.