Recent Topics
BMW S54 Rod Bearing Oil Pressures
by SlipperySimon
49 minutes 44 seconds ago
New year's in new York
by ram_man
Yesterday at 11:20 PM
Color of oil
by davizzel
Yesterday at 11:11 PM
Wet dry vacuum recommendations
by 97prizm
Yesterday at 10:43 PM
What the difference between Mobil 1 75W-90 and...
by JoeJ
Yesterday at 10:19 PM
Cornering lights installed
by Colt45ws
Yesterday at 09:55 PM
Goodyear Wrangler A/TS - Silverado
by CapitalTruck
Yesterday at 09:50 PM
peak 10w30
by jakewells
Yesterday at 09:28 PM
Chipped brake pad still good?
by Run
Yesterday at 09:24 PM
faulty fuel filter
by wuntun
Yesterday at 09:21 PM
Salt water in gas
by motor_oil_madman
Yesterday at 09:11 PM
Do you know how large Moose can get?
by StevieC
Yesterday at 09:02 PM
Correct lube for Detroit Tru-Trac
by code5coupe
Yesterday at 08:58 PM
Tesla Roadster ~ vs ~ Bugatti Chiron
by Artem
Yesterday at 08:01 PM
Any Fridge Experts Here?
by maverickfhs
Yesterday at 06:59 PM
Limited Edition Valvoline Dextron VI at Menards!
by mphilleo
Yesterday at 06:44 PM
Mix and send it?
by 2012AccentSE
Yesterday at 06:44 PM
What's the Skinny on Modern FRAM Filters?
by Chevrolet
Yesterday at 06:06 PM
Dowsing Rods?
by Reddy45
Yesterday at 05:47 PM
Want to start a Pita business
by HondaBroMike
Yesterday at 05:42 PM
Newest Members
norton13, Chevrolet, nik3314, Crowder1980, garyvze5Nn
63449 Registered Users
Who's Online
21 registered (AMC, Bandito440, 4WD, 4 invisible), 978 Guests and 15 Spiders online.
Key: Admin, Global Mod, Mod
Forum Stats
63449 Members
66 Forums
274049 Topics
4554700 Posts

Max Online: 3590 @ 01/24/17 08:07 PM
Donate to BITOG
Page 2 of 2 < 1 2
Topic Options
#3310376 - 03/13/14 09:48 AM Re: How can a driveshaft become unbalanced? [Re: Trav]
rockydee Offline


Registered: 03/09/14
Posts: 257
Loc: VA
Originally Posted By: Trav
Figure there is about 8oz of product in the spray can that actually ends up on the piece, prime and paint could be almost a pound of material.
Half an ounce out of balance can be noticeable.

http://www.rldial.com/Ultra%20High%20Speed%20Driveshaft%20Balancing.html


That makes plenty of sense. It just sucks crawling under a new rig and seeing a rusty drive shaft. Mine has no rust yet, and I want to keep it that way. Those water based products work?

Top
#3310688 - 03/13/14 02:14 PM Re: How can a driveshaft become unbalanced? [Re: rockydee]
Trav Offline


Registered: 11/20/06
Posts: 16517
Loc: MA, Mittelfranken.de
Yes they work good but its a seasonal application. The stuff is harmless to rubber and plastics and does not stain.
It is environmentally friendly also which i like better than petroleum based products.
No point in damaging the Earth unnecessarily right.

Hit the whole underside of the car every autumn liberally with these products and it will be fine even in the salt belt. great if you don't mind the yearly investment.
If the question were phrased, "are they as good as traditional rustproofing"? the answer is yes but only short term.

These are perfect also if you have an old car that only sees summer use but you still don't want rust to get a start.
They are not a spray and forget product. Here is some info..

http://www.cortecvci.com/Publications/Reports/reports.php

http://www.cortecvci.com/Publications/Reports/powerboat-article/Powerboat.pdf
_________________________
ASE L1, Master. Deutsch Meisterbrief.

Top
#3310828 - 03/13/14 04:55 PM Re: How can a driveshaft become unbalanced? [Re: zzyzzx]
Trav Offline


Registered: 11/20/06
Posts: 16517
Loc: MA, Mittelfranken.de
Originally Posted By: zzyzzx
I would think that things like dirt or rust could throw it off balance.


Dirt for sure but rust is another story. If the rust remains undisturbed like minimal surface rusting no real harm but when it develops into flakes and starts coming off then yes absolutely.
_________________________
ASE L1, Master. Deutsch Meisterbrief.

Top
Page 2 of 2 < 1 2