Is there a small remote filter mount which is suitable for running teacup filters like Wix 51394, Purolator 14477? The gasket seating area would require an ID of no more than 58 mm. The Wix 51394 gasket ID is 55mm and the OD is 63mm.
I have tried fitting a Purolator teacup on a Derale 25708 and it contacted about half the gasket, not sure if it would hold up. Of course the Derale 25708 is way too big for a teacup. Another unbranded filter mount (sold as a VW Beetle mount) had a gasket seating area unsuitable for a teacup filter, but worked with a Wix 51516 / L10241 sized filter.
I think 1/4" NPT would be beneficial for the elusive small mounting base. The Derale 25751 seems to have following spec: "Filter landing: 2-1/2", 2-3/4", so it could be smaller overall, but I haven't touched one yet.
A small filter mounting base is needed for narrow confines and we all know how cramped under the hood newer cars are getting.
I have tried fitting a Purolator teacup on a Derale 25708 and it contacted about half the gasket, not sure if it would hold up. Of course the Derale 25708 is way too big for a teacup. Another unbranded filter mount (sold as a VW Beetle mount) had a gasket seating area unsuitable for a teacup filter, but worked with a Wix 51516 / L10241 sized filter.
I think 1/4" NPT would be beneficial for the elusive small mounting base. The Derale 25751 seems to have following spec: "Filter landing: 2-1/2", 2-3/4", so it could be smaller overall, but I haven't touched one yet.
A small filter mounting base is needed for narrow confines and we all know how cramped under the hood newer cars are getting.