Vehicle: 2006 Toyota Yaris (1.5L)
Klms: 50000km
Oil: Valvoline VPS (Valvoline Professional Series) 10W-40 is a workshop oil used by my mechanic.
I emailed Valvoline Australia and they told me it's the same as Valvoline Engine Armour 10W-40.
Klms on Oil: 10000km
Not quite sure what to make of these results. I have changed the oil (now using Penrite Diesel FX) and filter and will be doing another UOA in 10000km. I don't have a trend at this stage. Comments?
Quote:
Vehicle: 2006 Toyota Yaris (1.5L)
Klms: 50000km
Oil: Valvoline Professional Series (VPS) - Workshop Oil (same as Valvoline Engine Armor 10W-40)
Grade: 10W-40
Klms: 10000
Cadmium 0
Antimony 0
Iron 5
Chromium 0
Copper 0
Lead 0
Aliminium 5
Tin 0
Silicon 28
Sodium 53
Calcium 2557
Nickel 0
Vanadium 0
Magnesium 11
Phosphorous 994
Silver 0
Titanium 0
Molybdenum 159
Zinc 1095
Barium 1
Potassium 1
Boron 3
Oxidation 10
Nitration 12
ViscosityAt100 11.8
Water 0.1
FTIRSoot TBN 3.52
FuelDilution 5.6
Laboratory Comments:
Dean,
Check for source of FUEL LEAK (injectors, lines etc. Fuel is at a SIGNIFICANT LEVEL; LUBRICANT and FILTER CHANGE is suggested if
not done at sampling time. Water is at a MINOR LEVEL. Viscosity result is invalid due to water contamination. Abrasives
(silicon/dirt) are at a MINOR LEVEL; Base Number is SLIGHTLY LOW.
Oil analysis performed by Roktex.
Klms: 50000km
Oil: Valvoline VPS (Valvoline Professional Series) 10W-40 is a workshop oil used by my mechanic.
I emailed Valvoline Australia and they told me it's the same as Valvoline Engine Armour 10W-40.
Klms on Oil: 10000km
Not quite sure what to make of these results. I have changed the oil (now using Penrite Diesel FX) and filter and will be doing another UOA in 10000km. I don't have a trend at this stage. Comments?
Quote:
Vehicle: 2006 Toyota Yaris (1.5L)
Klms: 50000km
Oil: Valvoline Professional Series (VPS) - Workshop Oil (same as Valvoline Engine Armor 10W-40)
Grade: 10W-40
Klms: 10000
Cadmium 0
Antimony 0
Iron 5
Chromium 0
Copper 0
Lead 0
Aliminium 5
Tin 0
Silicon 28
Sodium 53
Calcium 2557
Nickel 0
Vanadium 0
Magnesium 11
Phosphorous 994
Silver 0
Titanium 0
Molybdenum 159
Zinc 1095
Barium 1
Potassium 1
Boron 3
Oxidation 10
Nitration 12
ViscosityAt100 11.8
Water 0.1
FTIRSoot TBN 3.52
FuelDilution 5.6
Laboratory Comments:
Dean,
Check for source of FUEL LEAK (injectors, lines etc. Fuel is at a SIGNIFICANT LEVEL; LUBRICANT and FILTER CHANGE is suggested if
not done at sampling time. Water is at a MINOR LEVEL. Viscosity result is invalid due to water contamination. Abrasives
(silicon/dirt) are at a MINOR LEVEL; Base Number is SLIGHTLY LOW.
Oil analysis performed by Roktex.