I have a bit more time on my hands now that overtime has pretty much evaporated at work for the time being so I'm going to tackle the few remaining issues on my '96 Grand Prix. One of them is that one or more brake lines underneath the car is rusted and leaking. I plan on replacing any that look suspect, but this will be the first time I've done brake lines.
I've read a fair bit about it, but curious if anyone has any links or suggestions on what tools I will need for bending / cutting / flaring the lines. Links to good deals on the tools and/or the lines would be helpful. I plan on using the alloy (forget what it's called) that doesn't rust as opposed to steel lines, unless there's a gigantic cost difference. We don't generally have problems with rust here, I think this was a car from further north judging by the moderate amount of rust it has underneath. Thanks in advance.
I've read a fair bit about it, but curious if anyone has any links or suggestions on what tools I will need for bending / cutting / flaring the lines. Links to good deals on the tools and/or the lines would be helpful. I plan on using the alloy (forget what it's called) that doesn't rust as opposed to steel lines, unless there's a gigantic cost difference. We don't generally have problems with rust here, I think this was a car from further north judging by the moderate amount of rust it has underneath. Thanks in advance.