Specifically, what's wrong with the historical flashpoints presented in the bottom Blackstone report in post #7? Compare and contrast!
Enlighten us all...
There's a difference, but it isn't much of one.1. Pennzoil: Virgin FP: 430F
2. Pennzoil: Used FP: 395F
1. SuperTech: Virgin FP: 430F
2. SuperTech: Used FP: 440F
Do you see the difference? Do you understand what it means and what it implies about fuel in the samples?
Why is it irrelevant for a Ford? Ford may neither require nor recommend Dexos, but that doesn't mean a Ford engine can't or won't benefit from it.Irrelevant for a Ford
Use a higher grade like I do in my Tiguan. That's the only way you're going to get any useful result.As I stated earlier: Given today's prevalence of GDI engines causing fuel dilution, perhaps blenders should produce products that stay in-grade for at least a short duration OCI, or 3000 to 4000 miles.
How are you determining "isn't much of one"? It's a 35F drop; 8.1%.There's a difference, but it isn't much of one.
But you are determining "stay in grade" from a $30 oil analysis that the virgin versions, particularly for the Pennzoil product, deviate wildly from the manufacturer's claimed viscosity. Pennzoil claims it is 10.3cSt, yet the VOA shows 9.48cSt, that's a rather significant difference. At the very least that should raise an eyebrow.As I stated earlier: Given today's prevalence of GDI engines causing fuel dilution, perhaps blenders should produce products that stay in-grade for a short duration OCI, or 3000 to 4000 miles.
It's a rather massive leap to conclude that because the oil starts out thinner than some of its competitors that its performance in service is compromised. As I noted, it experienced less absolute viscosity loss, despite the presence of fuel, if we consider the $30 VOA's and UOA's accurate. In my books, that certainly qualifies as being "more stout".They should have turned the ultra Platinum line into a performance-based higher than normal high temperature high shear. Quit chasing all these crazy engine specs that neuter getting a great performance budget friendly oil. Barely even in the 30 weight. They can cut down on the TBN and just make it more Stout. If this is the best they can do on an oil that's hardly attainable to be found even in a store then both the marketing is wrong and supposedly their flagship oil is junk.
How are you determining "isn't much of one"? It's a 35F drop.
But you are determining "stay in grade" from a $30 oil analysis that the virgin versions, particularly for the Pennzoil product, deviate wildly from the manufacturer's claimed viscosity. Pennzoil claims it is 10.3cSt, yet the VOA shows 9.48cSt, that's a rather significant difference.
Furthermore, what does "stay in grade" achieve? The SuperTech lost considerably more viscosity; exhibited significantly more degradation due to mechanical shear, despite not having to deal with fuel dilution. Do we just ignore that because it managed to just stay off the 9.3cSt floor for the xW-30 range?
Well said!As stated on the front of the jug or bottle, I expect an oil to provide the SAE viscosity protection purchased for the duration of a normal, if not short, oil change duration. I would expect most every customer to want the same. This is not unreasonable.
Plainly, Pennzoil is not providing that with Ultra Platinum's initial, starting "basement bottom" viscosity for a multi-vis 30-weight oil. It easily fell out here within a popular Ford engine.
Super Tech stayed in grade. Pennzoil Ultra did not. Nevertheless, at least both turned in low wear metals numbers. That's something.
Given its price tag though, I wholly expect more from Ultra ... much more.
Pennzoil Ultra: "Where's the beef?" Loved the old ladies in that ancient Wendy's commercial...
No oil is going to retain viscosity in the face of fuel dilution, that's why the OP has been running xW-40's in his other Ecoboosts. The Pennzoil product did, again, assuming the Blackstone VOA/UOA figures are accurate, or at least accurate against each other, experience less viscosity loss despite the fuel dilution. That's a good showing for the oil.As stated on the front of the jug or bottle, I expect an oil to provide the SAE viscosity protection purchased for the duration of a normal, if not short, oil change duration. I would expect most every customer to want the same. This is not unreasonable.
So, you are just going to continue to ignore the fact that the cited visc from Pennzoil for the product is wildly different than what Blackstone shows us in the VOA?Plainly, Pennzoil is not providing that with Ultra Platinum's initial, starting "basement bottom" viscosity for a multi-vis 30-weight oil. It easily fell out here within a popular Ford engine.
SuperTech barely stayed in grade, despite the absence of fuel, you keep missing that. It was 0.33cSt away from being out of grade, despite the significantly higher starting viscosity and total lack of fuel dilution.Super Tech stayed in grade. Pennzoil Ultra did not. Nevertheless, at least both turned in low wear metals numbers. That's something.
So just a higher starting visc then? Again, based on a $30 VOA/UOA that deviates wildly from the spec sheet. UOA's and VOA's are incredibly abused on this site and this thread is no exception.Given its price tag though, I wholly expect more from Ultra ... much more.
UOA's and VOA's are incredibly abused on this site and this thread is no exception.
It’s bordering on the bizarre.This thread is a prime example of the misuse of oil analyses, jumps in logic, and bitog fairy tales.
Reality is bizarre. Much like the moose calf nibbling on the neighbor's tree this morning... it's winter here.It’s bordering on the bizarre.
What does the brand of vehicle or appropriateness of the oil for the application have to do with the difference between the Flashpoint on the Blackstone report and the fuel % reported on the OAI one?Is this Quaker State oil rated for use in this vehicle? I bet not.
Your response is non-sequitur.
Nonsense. You doubling down on trying to ignore what is clearly spelled out does nothing for your case here.More non-sequitur, non-applicable justification ... or obfuscation.
I've been trying to get you to understand all afternoon, yet this brick wall is clearly impenetrable, so steeped in confirmation bias that this endeavor has proven to be hopelessly futile. I understand just fine, it's not my comprehension of the material that's in question here, it's yours.What don't you understand?
Because of fuel dilution. That's been underlined countless times at this juncture but you continue to ignore it.Pennzoil Ultra wholly fell out of grade after a short OCI in a popular engine. Why?
Again, ignoring the chasm between the PDS and the $30 analysis from Blackstone.Because it started out at the bottom of SAE's acceptable viscosity range for a virgin 30-weight rated oil.
Not really.Well said!