Caution lap 448, 14 car but a tire, possibly the rear end is shifted. 47 car is the free pass.
Martinsville Speedway
- Thread starter Warstud
- Start date
- Status
Caution lap 458, 11 and the 22 made contact. The 22 eventually cut a tire and spun in turn 1. 38 is the free pass.
Caution lap 471, 34 car in the wall off turn 4 after spinning the 8 car. No free pass, 34 was involved. Will be a quickie yellow.
Last edited:
14 officially out, broken track bar mount.
Unofficial Top 10:
1. Martin Truex Jr
2. William Byron
3. Brad Keselowski
4. Denny Hamlin
5. Ryan Blaney
6. Kurt Busch
7. Kevin Harvick
8. Joey Loagano
9. Kyle Larson
10. Ryan Newman
1. Martin Truex Jr
2. William Byron
3. Brad Keselowski
4. Denny Hamlin
5. Ryan Blaney
6. Kurt Busch
7. Kevin Harvick
8. Joey Loagano
9. Kyle Larson
10. Ryan Newman
AZjeff
$50 Site Donor 2023
Wasn't this the track where BITD they were bending the left axle tube to get more bite and broke a bunch of left axles? Do they still do this to a lesser degree?
![[Linked Image from media.giphy.com]](https://media.giphy.com/media/3ov9k3LFxCxkrFLmXC/giphy.gif "[Linked Image from media.giphy.com]")
Originally Posted by AZjeff
Wasn't this the track where BITD they were bending the left axle tube to get more bite and broke a bunch of left axles? Do they still do this to a lesser degree?
They do have camber and toe on the solid axles still. They tend to do it on the hub end since they can have a radius end on the axle shaft into the hub. Also a lot of the Ford 9" housings they use will have a bit of negative camber built into them.
Wasn't this the track where BITD they were bending the left axle tube to get more bite and broke a bunch of left axles? Do they still do this to a lesser degree?
They do have camber and toe on the solid axles still. They tend to do it on the hub end since they can have a radius end on the axle shaft into the hub. Also a lot of the Ford 9" housings they use will have a bit of negative camber built into them.
Last edited:
- Status
