Search results

I was given a bottle of shell 1030 gas oil and it darkened at an alarming rate in my 03 Hyundai 2.7 motor, I also noticed the car randomly smoked on start up. I switched it out with delvac 1300 and it took 50 hours for it to not look "clean " anymore. The shell oil was the same darker color at...

Sadly, there's no number I can read on the filter anymore. The ATF seeping made it go away

Came off my bobcat. Trying to figure out what decade it's from. Thanks in advance everyone

I've been with OReilly for 6 years so that must have been before my time. I remember the day we were ordered to pull Fram off the bottom shelf of our Plano and they took the cross reference information out of our system. It was it was an immediate action. Found it strange.

The 51085 filters have poorly thrown on Mann stickers on them. WITH 4 HOLES FOR OIL FLOW. I had a panic attack when I saw the cases come through. $5.99 Jobber Microgard with 8+ holes, $14 Wix/Mann whatever filter with 4 oval holes...... I'm ignorant for thinking that way but I don't like...

Along with a cheat sheet for part numbers, which makes no sense being we've always had wix numbers for a all of OReilly and checkers...............................................

This is a cut out from the company. It came as a display for the commercial department.

We've been selling these for several months now. Got this adorable cut out thing within the last few days. One thing I like tremendously about these is they, on average, are $10-$15 in my store where the XP line is $20-$50+. They're also significantly more heavy, especially when comparing...

I will get the module # and a picture of the key fob tonight after work. As far as the truck not starting, if the horn relay is clicking under the dash, the key does nothing. I want to say the module was like c5000. I found them used on eBay and that's it. She doesn't use the remote start...

So we have a 97 expo that has a remote start system. It also only unlocks with that fob and if the battery dies in the fob, the truck won't start. " If the alarm/horn relay clicks under the column " the truck will lock itself if someone parks next to you or walks by if you don't lock the doors...

Working where I do, I receive oil all the time that has been sitting on a shelf for years. I currently have 9 gallons of 2 cycle oil, some dated early 2000s Anyone have a suggestion as to mixing up the oil besides shaking it by hand? I'm getting ready to open a new jug of tcw3 and was just...

Did you recommend aw46 due to my areas heat temp range? Or because aw46 is similar to ATF that my manual claims to want?

So maybe owatonna is who spec'd the system to run on ATF ? I personally don't care what I need to use. I just want to do what's best for all parts of the system. I've been reading that ATF handles heat better than aw fluids and has additives. Yet aw has more of a heat spread and also has...

Ok. I can easily do this. Question. What's the reason my 76 manual says ATF and current day says aw46? It's there any potential issue to avoid switching to aw46?

There's good chance that I'll be using this when it's 90+ outside. Winters are mid 30's in extreme cold cases. From a little research, aw46 mimics ATF. Is it thicker than ATF? Or have more wear additives?

The gentleman I got the skid steer from sent me pictures of the pump service manual. Fluid specs say mercon type a. It looks like it give me fluid characteristics of ATF as a guideline

I have this main pump, and then these 2 drive motors or pumps work the chain drive system

I'm not super familiar with hydraulic Fluid and the types or differences. My 75ish owatonna skid steer has ATF in the hydraulic system " per the previous owner " he claims that's what it takes. I want to replace the filters in the near future and do a fluid change. I don't have a manual yet...

Subframe is almost ready to go back in the skiddy As far as hot air hitting me and the hydraulics, I'll have to adapt and overcome because I have no other choice.

Certainly will. The only information I've found was of the predator vtwins being used in various bobcats or tractors. Haven't seen anyone use the duromax. I'm also curious how easily it starts since it's 50cc more. It seemed like the predator units are hard starting no matter.