Originally Posted By: MonumentOiler
I was able to get a single tube of #238 from a truck repair depot listed on the Schaeffer's website. When I've had a chance to evaluate it I'll post up.
I've used the 238, at the Number 1 grade so it's a little thinner than the standard B/2 grade stuff.
Excellent grease on everything I've packed it into.
Wheel Bearings, Electric drill drive gears, impact drive gears, timing belt tensioner bearings, throw out bearing, etc.
Very sticky/tacky stuff, have to be careful with the gun, or you'll break prime easily.
I'm a fan of this grease, I should tear down the drill and see how it's holding up. It only spins up to around 2000rpm, but I use it for alot of surfacing, so it goes about max speed with decent sudden loads on it every now and again. It seems to run better now, and it doesn't get nearly as hot in operation.