I am looking for recommendations for a HDPE dispenser bottle, to dispense additive into my fuel tank. I have found several by doing a goggle search, but the problem is that they all have too short a neck. I need a neck that is at least 3.5" long, because the filler on my Subaru is recesssed.
I have been using a 1 qt Sta-Bil bottle, because it has a 4" neck, but it has the problem of leaks at the fill cap. The threads at the fill cap have poor engagement, and therefore the cap can't be tightened down enough to get a leak proof seal, and this causes a mess when dispensing into the fuel tank. Except for the leak problem, this bottle is ideal.
So in summary I am looking for a HDPE dispensing bottle with the following attributes:
3.5" or longer neck
1/4 oz graduations, and can dispense at least 1oz total per pour
Total volume of 1/2 to 1 quart
TIA for your ideas!
In the meantime, I will also try to find a tighter fitting cap for the Sta-Bil bottle.
I have been using a 1 qt Sta-Bil bottle, because it has a 4" neck, but it has the problem of leaks at the fill cap. The threads at the fill cap have poor engagement, and therefore the cap can't be tightened down enough to get a leak proof seal, and this causes a mess when dispensing into the fuel tank. Except for the leak problem, this bottle is ideal.
So in summary I am looking for a HDPE dispensing bottle with the following attributes:
3.5" or longer neck
1/4 oz graduations, and can dispense at least 1oz total per pour
Total volume of 1/2 to 1 quart
TIA for your ideas!
In the meantime, I will also try to find a tighter fitting cap for the Sta-Bil bottle.