Fram FE3600 - 20k miles -6 months

Joined
Jan 24, 2022
Messages
19
Fram FE3600 used for 20k miles over 6 months in my 2017 Corolla. Filtered mostly Valvoline Synthetic High Mileage 5W30 at 5k mile intervals. The car has 150k miles on it.
 

Attachments

  • PXL_20231223_171635459.jpg
    PXL_20231223_171635459.jpg
    167.8 KB · Views: 175
  • PXL_20231223_171343805.jpg
    PXL_20231223_171343805.jpg
    175.1 KB · Views: 163
  • PXL_20231223_171335529.jpg
    PXL_20231223_171335529.jpg
    126.2 KB · Views: 163
  • PXL_20231223_171330181.jpg
    PXL_20231223_171330181.jpg
    113.3 KB · Views: 193
  • PXL_20231223_171325110.jpg
    PXL_20231223_171325110.jpg
    150.8 KB · Views: 195
  • PXL_20231223_171318840.jpg
    PXL_20231223_171318840.jpg
    218.3 KB · Views: 199
Yes, I can do that tomorrow. I ran my pinky through one pleat and nothing came out though.
That won't tell you much. Better to wick most of the oil out, then push folds of a pleat apart at least slightly, and see what you can see with a magnifier.
 
Fram FE3600 used for 20k miles over 6 months in my 2017 Corolla. Filtered mostly Valvoline Synthetic High Mileage 5W30 at 5k mile intervals. The car has 150k miles on it.

Can you measure the media cartridge length from endcap to endcap with a measure tape?
Filter looks good for 20K miles was expecting it to be a bit more loaded on the media. Car is one heck of a highway beast to rack up that many miles in 6 months. Thanks for the pics.
 
Sorry it took so long everyone. This was the first filter I'd ever removed the media from, so the cuts are not as clean as I'd have liked. Also, that mesh is tough and hard to cut through. I don't own a vice to squeeze the oil out, so I folded the media and rolled over it with my toolbox a few times. I did not see any shiny debris on the media or my glove during/after. The filter media and mesh measured 35".
 

Attachments

  • PXL_20240107_211848929.jpg
    PXL_20240107_211848929.jpg
    157.2 KB · Views: 61
  • PXL_20240107_211856526.jpg
    PXL_20240107_211856526.jpg
    196.9 KB · Views: 58
  • PXL_20240107_211929445.jpg
    PXL_20240107_211929445.jpg
    169.9 KB · Views: 55
  • PXL_20240107_211939842.jpg
    PXL_20240107_211939842.jpg
    171.5 KB · Views: 54
  • PXL_20240107_211943677.jpg
    PXL_20240107_211943677.jpg
    252.2 KB · Views: 54
  • PXL_20240107_211955091.jpg
    PXL_20240107_211955091.jpg
    132.5 KB · Views: 58
  • PXL_20240107_212002534.jpg
    PXL_20240107_212002534.jpg
    256.5 KB · Views: 56
  • PXL_20240107_212014025.jpg
    PXL_20240107_212014025.jpg
    182.9 KB · Views: 58
Last edited:
Yeah, I've heard those can be a pain to cut. I'll be doing a wire backed filter too eventually. I think the second photo really looks black. Is that the case? Is it real black like the picture shows. It does look like it got loaded up pretty good. This is good stuff thanks
 
Back
Top