Don't get me wrong I think Amsoil is great.

Status
Not open for further replies.
Originally Posted By: Mokanic
The Mann filter for my Volvo is still a German-built filter and it's twice the filter of a Pureolater. Built lik a tank inside and out.


That's my knowledge/experience with Mann as well.

The Mann I put on my Honda is not half the Mann on my Volvo. But it's just an odd odd world. One of my first choices when I started to get choosy about OF's so many years ago was a Mann.... then I went to SDF...then EaO.....little did I know I would end up running a Mann on two cars, one a Honda.
 
Originally Posted By: Pablo
Originally Posted By: Mokanic
The Mann filter for my Volvo is still a German-built filter and it's twice the filter of a Pureolater. Built lik a tank inside and out.


That's my knowledge/experience with Mann as well.

The Mann I put on my Honda is not half the Mann on my Volvo. But it's just an odd odd world. One of my first choices when I started to get choosy about OF's so many years ago was a Mann.... then I went to SDF...then EaO.....little did I know I would end up running a Mann on two cars, one a Honda.


I am sure I like the Mann brand, don't have any reason not too.

I have 7500 miles on this oil change with OW30 OSS Amsoil with the ML 1017 I am getting it tested this week, didn't use any between filter changes, (oil that is)has done city and highway, really interested in seeing how it's done, been close to 14000 miles since last test.
 
I am still not sure how to post my oil Analise on here.

But here are a few numbers.

Silcon 49

Iron 14

Potassium 519uc

Sodium 215uc

Calcium 7380uc

Zinc 1257

Aluminum 13

Also I have antifreeze in my oil as well.
 
Originally Posted By: BAD1
I am still not sure how to post my oil Analise on here.

But here are a few numbers.

Silcon 49

Iron 14

Potassium 519uc

Sodium 215uc

Calcium 7380uc

Zinc 1257

Aluminum 13

Also I have antifreeze in my oil as well.


Don't post it here. Post it here:

http://www.bobistheoilguy.com/forums/ubbthreads.php?ubb=postlist&Board=3&page=1

Just type it exactly as it is on the report. Or convert it to a .jpg, get it hosted and link to it.
 
Originally Posted By: Pablo
Originally Posted By: BAD1
I am still not sure how to post my oil Analise on here.

But here are a few numbers.

Silcon 49

Iron 14

Potassium 519uc


Opppppppppssss sorry.

Thanks for the heads up.
Sodium 215uc

Calcium 7380uc

Zinc 1257

Aluminum 13

Also I have antifreeze in my oil as well.


Don't post it here. Post it here:

http://www.bobistheoilguy.com/forums/ubbthreads.php?ubb=postlist&Board=3&page=1

Just type it exactly as it is on the report. Or convert it to a .jpg, get it hosted and link to it.
 
Status
Not open for further replies.
Back
Top