Just bought this used trooper with 160,000 miles.
I have been searching for some information.
This is 3 wheel ABS.
I measured the rear sensor and it is 1400 ohms which seems ok.
Brake and RearABS Light comes on as soon as you start engine and never goes out.
I do not have a scan tool to read codes. I came across info that you can jumper pins 4 and 12 and it will give you the ABS codes. Tried this and got nothing.
It seems people were saying if the ABS light comes on, then the red brake light will also light up.
this did nothing
http://lasanguine.com/RodeoTechnical/ABSDTC.pdf
here is some info
http://www.eanswer.com/car/66lcr-isuzu-trooper-does-a114-isuzu-trooper-metering-pressure.html
I have been searching for some information.
This is 3 wheel ABS.
I measured the rear sensor and it is 1400 ohms which seems ok.
Brake and RearABS Light comes on as soon as you start engine and never goes out.
I do not have a scan tool to read codes. I came across info that you can jumper pins 4 and 12 and it will give you the ABS codes. Tried this and got nothing.
It seems people were saying if the ABS light comes on, then the red brake light will also light up.
this did nothing
http://lasanguine.com/RodeoTechnical/ABSDTC.pdf
here is some info
http://www.eanswer.com/car/66lcr-isuzu-trooper-does-a114-isuzu-trooper-metering-pressure.html