Search results

  1. R

    Jeep Patriot

    The jeep is a 4x4 and I did not have the 4x4 engaged. I know it has a ptu vs a transfer case. Could that PTU make a whining sound?
  2. R

    Jeep Patriot

    Originally Posted By: meangreen01 With a vehicle that new take it back to the dealer and see what they have to say. I did take it back, and the mechanic told me that my truck trans gears were cut a bit straighter for performance and that's why the gears are noisy.
  3. R

    Jeep Patriot

    Prior to me purchasing the 2012 Patriot I had a 2010 Patriot 5 speed which did not make a single gear noise. There is no way that whine is normal, I've driven dozens of 5 speeds throughout my years and never encountered anything this noisy. Other than changing the trans, is there an oil you...
  4. R

    Jeep Patriot

    I have a new 2012 Jeep Patriot 5 speed 4x4. The problem is at highway speeds there is a constant gear whine. On the Jeep forums there are others with the same gear whine and to date the only remedy is to change the transmission. Chrysler's recommended trans fluid is actually an atf+4. The...
  5. R

    1/2 qt low

    ok, thanks for the replies
  6. R

    1/2 qt low

    I purchased my Jeep Patriot new 3 months ago. It's a 2010 and has the 2.4 (4 cyl) engine mated to a 5 speed. I changed over to synthetic (Penzoil Platnium)at 1800 miles and today I checked the oil and was a 1/2 qt low. I now have 4600 miles, is it normal to lose 1/2 qt within 2800 miles? The...
  7. R

    Who makes Mopar filters?

    I have the 5.7 Hemi with the same heavey knock when cold, almost sounds like a disel. I had a stethescope on the motor today and it sounds like it's coming from a part that is attached to the motor it has two wires comig from it. I don't know the name of that part. But they may have used that...
  8. R

    Do you suck your oil filter?

    I'm gonna try this my next oil change, later sucka's
  9. R

    80w 90 or 75w 140

    I came to my conclusion based on the results from this testing, http://www.synthetic-oil-tech.com/Gear%20Lube%20White%20Paper.pdf
  10. R

    80w 90 or 75w 140

    I have read that the Castrol Hypoy C 80w 90 oil is very good as a mineral oil, would this oil be suitable and what does hypoy c mean?
  11. R

    80w 90 or 75w 140

    Wow, thank you so much for all the addtional information.
  12. R

    80w 90 or 75w 140

    My mechanic who is installing this has a co worker who drags alot of cars and he was able to get the Royal Purple 75w 140 in a mineral base. I did order the Mag Hytec cover so it will hold more fluid. I am definitely staying with a mineral base, so do you think I should stick with the 80w 90...
  13. R

    80w 90 or 75w 140

    I have a 2009 Dodge Ram 1500 4x4. I just installed an Auburn lsd and there manual says to use non synthetic 80w 90 and that synthetic is NOT recommended because of chatter, but my Dodge truck manual says to use 75w 140 synthetic. If I use one oil I lose the warranty on the lsd, and if I use the...
  14. R

    lsd oil

    I am ok using a mineral oil but I put on about 6000 miles every two months that means I would have to service my rear at almost every oil change. Is it possible to push the drain interval for the rear to 12000 miles? Using mineral oil. Thanks for the replies
  15. R

    lsd oil

    I have an 09 Dodge Ram 1500 4x4 and will be installing an Auburn limited slip next week. The Auburn instruction says not to use synthetic oil at all and to change the rear oil every 7500 miles. Is this correct? no synthetic and early changes? Thanks
  16. R

    How hot can coolant get?

    In my Dodge Ram it has a 192 deg thermostat and the coolant sits at 194 and the oil temps are at 197, this is with outside temps of 98 degrees and a/c. I changed the thermostat from the original (203 degree)to the 192 degree.
  17. R

    Mopar cold air intake sluggish

    Let me clarify my previous post, My original exhaust was a single 3" in/out and I went to a 3" in/dual 2.5 out. Would my current set up be cosidered too big of a pipe? And would you do a chambered or straight thru design muffler? Thanks in advance
  18. R

    Mopar cold air intake sluggish

    Would a single 3" in/out to a 3" in/dual 2.5 out be cosidered too big of a pipe? And would you do a chambered or straight thru design muffler? Thanks in advance
  19. R

    Mopar cold air intake sluggish

    Originally Posted By: kkreit01 If it was done "along" with your Magnaflow, I think it's your exhaust to blame. I had an intake and Magnaflow on my previous Ford 4.6 3V. I noticed (what felt like) a loss of low-end torque when I performed the exhaust mod. What exhaust did install from the...
  20. R

    Mopar cold air intake sluggish

    This install was done three months ago along with the new magnaflo muffler. The Mopar cai is actually larger than the stock unit. There is no hot wire this is a speed density type system. I thought it could have been the new exhaust not having any back preassure. Also another forum member said I...
Back
Top