This is on my Land Rover LR3. Got gas the other day and drove it home, parked it. When I started it, the CEL was on and it was bucking a bit, but normalized pretty quick. I stopped by the guy I use and he very kindly scanned the codes for me and looked at the fuel trim data. It wasn't running rich at that time.
Here are the codes:
P0172 system too rich bank 1
P0175 system too rich bank 2
P0480- 14 fan 1 control circuit (historic code)
He mentioned it could be the MAF sensor. It's a new Denso one I got from amazon for $50 last summer. I bring that up because I'm wondering if it I got a counterfeit one?
Any ideas about the codes? Thanks much!
Here are the codes:
P0172 system too rich bank 1
P0175 system too rich bank 2
P0480- 14 fan 1 control circuit (historic code)
He mentioned it could be the MAF sensor. It's a new Denso one I got from amazon for $50 last summer. I bring that up because I'm wondering if it I got a counterfeit one?
Any ideas about the codes? Thanks much!