Recent Topics
15w40 in my automatic trans.
by Ursatdx - 09/17/19 03:16 PM
Update on my Stihl BG 86
by 1978elcamino - 09/17/19 03:11 PM
Offset print oil
by Matt_Pill - 09/17/19 03:06 PM
Which 508.00 oil would you choose?
by Vigg - 09/17/19 02:55 PM
Any BMW LL04 recommendations?
by M3m3x5 - 09/17/19 02:18 PM
5W30 Suggestions/Subaru
by Motoretro - 09/17/19 02:18 PM
Recommend Costco tires
by henni - 09/17/19 01:58 PM
Castrol SRF Shortage
by kyoo - 09/17/19 01:26 PM
All aftermarket drums and shoes = junk?
by nthach - 09/17/19 12:38 PM
Synthetic ISO 32 Hydraulic Fluid for BL-7000SLX
by 05UFCaptain - 09/17/19 11:51 AM
TPS only seeing 3.7v at WOT
by joegreen - 09/17/19 11:39 AM
Granite Countertops Are Magnetic. Who Knew ?
by Dwight_Frye - 09/17/19 09:44 AM
2019 J.D. Power VDS
by buster - 09/17/19 09:05 AM
Possible to add catch can?
by cwilliamsws6 - 09/17/19 09:02 AM
Update on GF-6
by buster - 09/17/19 08:40 AM
motul eco-lite 5w30
by avi1777 - 09/17/19 07:47 AM
Hyundai sonata 2.4l burning oil
by Grambo - 09/17/19 07:22 AM
Mazda CX5 2.5 oil question
by Tallman - 09/17/19 06:54 AM
Can I use 10W40 gtx HM in cold winter like -5F?
by Cheburashka - 09/17/19 06:43 AM
BMW Longlife-04: Evolving Performance Requirements
by Bjornviken - 09/17/19 06:40 AM
Newest Members
thetransman, SamBilbrey, williamfoster060, kappa8, jayrod65
69308 Registered Users
Who's Online Now
99 registered members (4WD, 1978elcamino, 03s, 2004tdigls, 007, 72sub, 16 invisible), 2,365 guests, and 33 spiders.
Key: Admin, Global Mod, Mod
Forum Statistics
Forums67
Topics294,693
Posts5,064,706
Members69,308
Most Online3,532
Jul 30th, 2019
Donate to BITOG
Print Thread
Hop To
Lucas Synthetic Oil Stabilizer #289999 07/02/05 09:48 AM
Joined: Jun 2005
Posts: 1,382
C
Crashbox Offline OP
OP Offline
C
Joined: Jun 2005
Posts: 1,382
I purchased a fair quantity of this pre-BITOG. Haven't used it in any vehicle yet and may not do so because of some evaluations/experiences with the non-syn variant on this board.

Maybe I'll send some in for a VOA, haven't found one on it yet...

I have, however, found a terrific use for it- oiling my bicycle parts! It's virtually water-clear.

I don't want to start a firestorm here but has anyone else used the synthetic stuff? Just curious.

Re: Lucas Synthetic Oil Stabilizer #290000 07/02/05 12:37 AM
Joined: Jun 2002
Posts: 20,352
MolaKule Offline
Global Moderator
Offline
Global Moderator
Joined: Jun 2002
Posts: 20,352
Haven't used it but it's similar to STP in that it has a high viscosity base oil with a few additives. Where STP uses OCP's, the base for Lucas is mostly high viscosity PAO's and dispersants.

But go ahead and do a VOA and see what if any elemental additives can be seen.

Re: Lucas Synthetic Oil Stabilizer #290001 07/02/05 02:45 AM
Joined: Jun 2005
Posts: 1,382
C
Crashbox Offline OP
OP Offline
C
Joined: Jun 2005
Posts: 1,382
Thank you for the info, MolaKule. I might just decide to send a VOA in. My suspicion, though, is that not too much may show element-wise but I could be wrong.

Maybe it's a clear fluid because they used "transparent molybdenum"- [Big Grin]

Re: Lucas Synthetic Oil Stabilizer #290002 07/03/05 10:03 PM
Joined: May 2002
Posts: 5,068
B
Bror Jace Offline
Offline
B
Joined: May 2002
Posts: 5,068
It was Bob who said years ago that most (all?) of Lucas Oil Stabilizer was bright stock ... a highly viscous petroleum component. He said that it had no, or almost no, barrier anti-wear adds.

If this is true, elemental analysis is going to be a bit disappointing and won't answer a lot of the questions you/we have.

MolaKule, OCPs? [Confused] I thought STP was mostly PIB - poly isobutane - but my memory for non-work stuff has been pretty lousy lately. [Embarrassed]

--- Bror Jace

Re: Lucas Synthetic Oil Stabilizer #290003 07/03/05 10:35 PM
Joined: Jun 2002
Posts: 20,352
MolaKule Offline
Global Moderator
Offline
Global Moderator
Joined: Jun 2002
Posts: 20,352
Many of the Olefin copolymers are made from the PIB series.

The olefin copolymer is made by the reaction of of one or more monomers (single molecular units) which is usually butylene and/or propylene. The polyisobutylene is a polymerized form of butylene.

Basically, it's related to the family of liquid rubbers and the thinner versions of tackifiers.

Lucas appers to be a mix of brightstocks and OCP's, very similar to the Xentec stuff.

Re: Lucas Synthetic Oil Stabilizer #290004 07/04/05 02:34 AM
Joined: Jun 2005
Posts: 3,327
B
bruce381 Offline
Offline
B
Joined: Jun 2005
Posts: 3,327
from
MolaKule
"Lucas appers to be a mix of brightstocks and OCP's, very similar to the Xentec stuff."

how do you know is thier data? I vote for 100% OCP.
bruce

Re: Lucas Synthetic Oil Stabilizer #290005 07/04/05 06:34 AM
Joined: Jun 2002
Posts: 20,352
MolaKule Offline
Global Moderator
Offline
Global Moderator
Joined: Jun 2002
Posts: 20,352
Because of the reactions with certain esters.

Re: Lucas Synthetic Oil Stabilizer #290006 07/05/05 06:38 AM
Joined: Jun 2005
Posts: 3,327
B
bruce381 Offline
Offline
B
Joined: Jun 2005
Posts: 3,327
Sorry I do not understand "reactions with certain esters" reaction to what with what.
How does that prove brighstocks and OCP?

I thought the Lucas was a OCP VII with possibly some ZDDP and or paratac.
bruce

Re: Lucas Synthetic Oil Stabilizer #290007 07/06/05 01:04 AM
Joined: Jun 2002
Posts: 20,352
MolaKule Offline
Global Moderator
Offline
Global Moderator
Joined: Jun 2002
Posts: 20,352
By using specific esters, one can determine if the base oil contains OCP thickeners or OCP VII's.

The ester causes the sample to polmerize at room temp via a polymerization reaction.

Anything not made with ethylene or propylene or butylene monomers will separate from the polymerized goo. Goo is my scientific term for "gellation."

I discovered this some time ago when developing, analyzing, and compounding esters and esterified additives.

Re: Lucas Synthetic Oil Stabilizer #290008 07/06/05 02:14 AM
Joined: Jun 2005
Posts: 3,327
B
bruce381 Offline
Offline
B
Joined: Jun 2005
Posts: 3,327
Very good trick I would like to know more, I have used the micro wave oven for ester testing hotter the more ester. Since most avalible OCP VII are only a samll percent OCP with the >80% balance a base oil if you weighted it all out you could get a good number on the amount of OCP.
bruce

Re: Lucas Synthetic Oil Stabilizer #290009 07/06/05 05:22 AM
Joined: Jun 2002
Posts: 20,352
MolaKule Offline
Global Moderator
Offline
Global Moderator
Joined: Jun 2002
Posts: 20,352
The actual fluids used and the exact processes are proprietary.

One thing you have to consider is, if they use a high molecular weight succinimide dispersant, this is an ester as well and you have to account for that which SF has done.

Re: Lucas Synthetic Oil Stabilizer #290010 07/09/05 08:38 PM
Joined: Apr 2005
Posts: 51
B
babydoggy Offline
Offline
B
Joined: Apr 2005
Posts: 51
Lucas stabilizer does not have any zinc or moly. I read this from their spokeperson in an interview. He would not state what it does have in it. There are other anti-wear additives. For the price they are charging I would hope it it does have unique additives. Maybe they are relying on viscosity to compensate for extreme pressure additives.

Previous Thread
Index
Next Thread

BOB IS THE OIL GUY® Powered by UBB.threads™