Thread Size Checker - Review

[MasterSolenoid]

Bought these Thread Size Checkers recently.
Looks like their very well made and easy to read sizes.
I'm going to hang them on my Fastener Cabinet.

(6-32 to 1/2"-20 & M4 to M12) Screw Bolt Nut Thread Measure Gauge Size Checker | eBay

Solid steel thread checker on wire lanyard. Thread gauges are used to identify size and thead pitch of nuts, bolts and screws.

www.ebay.com

 

[atikovi]

For a little more they sell a larger size range.

https://www.amazon.com/Bolt-Thread-Checker-Complete-Metric/dp/B06ZYD4SS8

 

[spasm3]

I have a wall mounted one.

 

[Pablo]

Back when we lived in Duvall if I got an odd one I would roll down the hill to the old timey hardware store to check against their stock.

 

[paulo57509]

I have both an SAE and metric screw checker plates.

I typically use a caliper and thread pitch gauges (if needed). The pitch gauges are kind of hard to read if comparing threads that are close in number; I had to sort through some 1/8" NPT and 1/8" BSPT fittings and the difference between 27tpi and 28tpi (respectively) is very subtle.

 

[D60]

I've had this single-cable one for years. It's useful, with its limitations. I kinda think I got it from Travers.

For the ultimate versatility you really need:

 

[RitcheyRch]

For a little more they sell a larger size range.

https://www.amazon.com/Bolt-Thread-Checker-Complete-Metric/dp/B06ZYD4SS8

I need to add one of these to my tool collection

 

[Snagglefoot]

It’s just what my MasterCard bill needs! Place in cart.

 

[RitcheyRch]

This looks like a nice one. A little pricey though.

ROYALEAGLEX™ Nut and Bolt Thread Checker (Inch & Metric)

FEATURES: Excellent Identifying :The bolt size and thread gauge has common standard and metric thread sizes Identifying Hardware from #6 to 3/4" 4mm to 16mm. Each size has a nut and bolt checker on the same gauge. Drill Gauges: This nut and bolt thread checker has 8 different size holes at 4mm...

royaleaglex.com