Anyone done this? Looks like I'm getting two 25 foot rolls, one 5/16", one 3/8. My silhouette van has numerous factory connectors and steel crimped on to nylon. Rust is getting at the stuff and I plan to eliminate a few failure points. (There's a junction near the subframe so they can lift the powertrain in at the factory and hook it up right there, for example.)
Am mostly set but wondering what people are using for cutting the nylon line cleanly. Was going to use a hacksaw blade.
They say heating the line in boiling water will help it slip over the hose barbs and fit snugly, so let's see how that goes. Supposedly NAPA has the quick-connects and everything else I'll need...
Am mostly set but wondering what people are using for cutting the nylon line cleanly. Was going to use a hacksaw blade.
They say heating the line in boiling water will help it slip over the hose barbs and fit snugly, so let's see how that goes. Supposedly NAPA has the quick-connects and everything else I'll need...