3 of the vehicles I service use the FL-910s, fram 3614 or purolator 10241 filters. I was curious about the efficiency of the 10241 line-up so I sent purolator tech support an email. Here is what I received about the 10241 filter specs. I have two L10241 and one PL10241 in the line up to use next as they were on sale and the updated versions. I think I'll stick with the Fram TG/Ultra moving forward for the 5-6k OCIs I run. The first two aren't horrible but the boss... yikes.
The L10241 is listed as a 25 micron filter at 99%.
The PL10241 is listed as a 21 micron filter at 99%.
The PBL10241 is listed at 46 at 99%.
Thank you,
Mann+Hummel Product Information
Product Information (800) 526-4250)
Mon-Fri, 8:00am-7:30pm,
& Sat, 9:00am-5:30pm (Eastern)
The L10241 is listed as a 25 micron filter at 99%.
The PL10241 is listed as a 21 micron filter at 99%.
The PBL10241 is listed at 46 at 99%.
Thank you,
Mann+Hummel Product Information
Product Information (800) 526-4250)
Mon-Fri, 8:00am-7:30pm,
& Sat, 9:00am-5:30pm (Eastern)
Last edited: