Oil filter drain tool

[Samuraidog]

I want one of these, but can't find them anywhere.

https://www.youtube.com/watch?v=F60Bxn82WmA

Seems like the perfect complement to a Fumoto valve for a mess-free oil change.

 

[buck91]

That is pretty neat, would be great for all these horizontal Ford filters!

 

[SatinSilver]

On the video there's a website noted, www.brianscooltools.com which mentions the tool but no pricing. There is a place to email the guy so I'll send him a message and let you know if I hear anything back.

 

[dlundblad]

I am not sure I'd want to beat on a filter while it was screwed onto an engine block.

 

[Samuraidog]

Already done. I also checked ebay per the comments, but I couldn't find anything.

Originally Posted By: SatinSilver
On the video there's a website noted, www.brianscooltools.com which mentions the tool but no pricing. There is a place to email the guy so I'll send him a message and let you know if I hear anything back.

 

[The motor guy]

Originally Posted By: dlundblad
I am not sure I'd want to beat on a filter while it was screwed onto an engine block.

Why? I would break it loose and then tighten it back up a little just make sure somebody didn't overtighten it.

 

[Samuraidog]

This device also has me wondering why nobody has thought of somehow jury rigging one of those ice maker application self-piercing saddle valves for use on oil filters. I guess the challenge would be finding a way to mount it to the filter.

 

[Bluestream]

Just use a nail and hammer...cheaper and more reliable!

 

[zzyzzx]

Unless I'm missing something, doesn't one still need to drain what's in the pan?

 

[Samuraidog]

Of course. However, even after draining the pan, I get some spillage from the top of the filter when unscrewing it. I have used a water/pop bottle with some success, but this device would be perfect for draining some of the residual amount in my vertically located oil filter.

Originally Posted By: zzyzzx
Unless I'm missing something, doesn't one still need to drain what's in the pan?

 

[Kool1]

The hammer the guy is using in the video is pretty big and it is taking a few smacks to get his tool mounted. If you use a thick canister oil filter, such as K&N, you may have to beat the daylights out of it to get the tool mounted.

 

[dlundblad]

Originally Posted By: motor_oil_madman
Originally Posted By: dlundblad
I am not sure I'd want to beat on a filter while it was screwed onto an engine block.

Why? I would break it loose and then tighten it back up a little just make sure somebody didn't overtighten it.


Over tightening wouldnt worry me.

Banging on the threads sticking out of an engine does though.

 

[Benito]

Originally Posted By: dlundblad
Over tightening wouldnt worry me.

Banging on the threads sticking out of an engine does though.


Agree, not worth the risk.

Looks like the inventor does mobile oil changes so this tool works for him while any risk is more with the vehicle owner.

 

[Rat407]

This will only work well with filters that do not have anti-drainback valves. Otherwise you still get the oil up in the block after you remove the filter. This works well on his F250 diesel because it allows to drain all the oil out of the filter and block.

 

[OilFilters]

I just changed the oil filter on the exact truck in that video. I can't POSSIBLY think of why you could ever need that?!?! Unscrew the filter a few turns...it starts to leak. Let it drain for 5 minutes, come back, unscrew some more. You're done. It requires one disposable glove. No paper towels. No oil anywhere except in the pan.

On a horizontal filter I could see some usefulness...but you're better off installing a remote filter if it's that big of deal for you.

 

[mjoekingz28]

Originally Posted By: Samuraidog
Of course. However, even after draining the pan, I get some spillage from the top of the filter when unscrewing it. I have used a water/pop bottle with some success, but this device would be perfect for draining some of the residual amount in my vertically located oil filter.

Originally Posted By: zzyzzx
Unless I'm missing something, doesn't one still need to drain what's in the pan?



Maybe try using a newspaper bag over the filter when removing. I think I tried it for the first time earlier this year, on a whim I guess, and dont remember spilling a single drop. What a departure from the crazy mess of past oil changes.

 

[goodtimes]

How about drill a hole in it. Another bigger one on the side might allow something in to lift the adbv.

 

[ZeeOSix]

Originally Posted By: OilFilters
I just changed the oil filter on the exact truck in that video. I can't POSSIBLY think of why you could ever need that?!?! Unscrew the filter a few turns...it starts to leak. Let it drain for 5 minutes, come back, unscrew some more. You're done. It requires one disposable glove. No paper towels. No oil anywhere except in the pan.


Because the guy in the video has butterfingers as shown towards the end of the video.

 

[Eddie]

Unscrew it slightly and put a gallon plastic bag over it and then unscrew it. The oil collects in the plastic bag. Just don't let the bag drop. ed

 

[Stewie]

I just put a towel underneath the filter and wipe out any spillage.

This shouldn't be necessary unless it is a hard to reach spot.