How much P/S fluid does my 1998 Jeep Wrangler

[kawzak]

I am going to have to drain and refill my P/S system. 1998 Jeep Wrangler 4.0L engine. Anyone out there had to do this-how much fluid do I need. thanks for any replies.

 

[Scott_mi]

While you wait to see if anyone has first hand knowledge....here's a start.

From a post about a 1997 TG Wrangler
Quote:
I finished installing my pump. I did a full flush and fill, everything went and works great! After the full flush I used about 1 1/2 quarts. Thanks Jerry for the info..


From a 95 XJ Cherokee
Quote:
The reservoir took about 2 bottles and then after bleeding the system it took about 1/2 of the 3rd bottle.

So about 30 OZ of fluid any one who is planning on doing a PS pump replace (new pump, lines, filter, and cooler)

 

[JerryBob]

PS doesn't seem to be listed here, but the Amsoil site otherwise has great vehicle info.

http://www.amsoil.com/mygarage/vehiclelookuppage.aspx?url2=1998+JEEP+WRANGLER+S

It probably wouldn't be more than a full quart of whatever you get, so that's probably why it isn't listed.

 

[SnowDrifter]

I got 3 bottles of Amsoil's p/s fluid. Sucked the reservoir, filled it with new fluid. Did it every time I drove until I went through the bottles. Was actually a wrangler with the 4.0 too hahah

I couldn't tell you the percentage of new fluid though