I did a bunch of maintenance today on my 2012 Accord today which included a transmission fluid drain and refill. I got frisky and unplugged the negative cable on the battery to reset the TCU to relearn shifting on the new fluid. Upon restarting the car the radio requires a code to regain function of the radio. This is nothing I haven't done 10 times before without issue, but this time when putting the radio code in I am getting error messages. It allows 10 attempts before "locking you out" but all you have to do is unplug the negative cable and you can try again.
At any rate, I 100% have the right code. I have it in the owners manual and it is labeled in the car as well in a discrete location. I have tried unplugging the battery and unplugging the fuses. NO LUCK!
Does anyone have a fix for this? It is just too coincidental that it worked fine before unplugging the battery.
At any rate, I 100% have the right code. I have it in the owners manual and it is labeled in the car as well in a discrete location. I have tried unplugging the battery and unplugging the fuses. NO LUCK!
Does anyone have a fix for this? It is just too coincidental that it worked fine before unplugging the battery.