Originally Posted By: Steve S
Originally Posted By: rslifkin
I usually change it hot, and if it's not already warm when I'm ready to change it, I'll take it for a 4-5 mile drive to warm things up a bit. I usually let it sit for 15 - 20 minutes or so, then drain it, and let it drain for a good 20 minutes or a little more if it's still dripping oil out. By then, the filter and other hot stuff around it has cooled enough to remove it safely.
pull the plug change the oil filter and by then the oil should have drained enough. No more needed. There should be no Voo Doo involved in changing oil.
Steve - it's a little tough to do that, as the filter on mine sits on an angle, so it dumps oil out of the filter, across the starter, and onto the exhaust y-pipe when you pull it, which spreads the drips enough that you can't also have the drain pan under the drain plug without it dripping on the garage floor. Plus, it needs a little cooling time first, as you're reaching past the y-pipe and up above the starter to get to the filter, and usually burn yourself a little anyway from dripping oil down your arm.