Can Someone Find Me An Oversize?

[Defiance665]

Quote:
Part Number: 51626
UPC Number: 765809516267
Principal Application: Dodge Monaco (91), Eagle (88-92), Jeep (87-93)
All Applications
Style: Spin-On Lube Filter
Service: Lube
Type: Full Flow
Media: Paper
Height: 3.812
Outer Diameter Top: 3.663
Outer Diameter Bottom: Closed
Thread Size: 20X1.5 MM
By-Pass Valve Setting-PSI: 8-11
Anti-Drain Back Valve: Yes
Burst Pressure-PSI: 370
Max Flow Rate: 9-11 GPM
Nominal Micron Rating: 21

Gasket Diameters
Number O.D. I.D. Thk.
Attached 2.834 2.462 0.200



I looked but couldnt find anything, If you know of one please tell me so I can get it next oil change.

 

[Gary Allan]

The bypass setting is a tick higher, but this is longer with the same diameter.

Part Number: 51324
UPC Number: 765809513242
Principal Application: Small GM/Isuzu Diesels (81-83), Chevrolet Corvette (91-95), Ford/Mazda Diesel (83-87), Dodge/Mitsubishi Diesel PUs (83-84), Mitsubishi Fuso Trucks
All Applications
Style: Spin-On Lube Filter
Service: Lube
Type: Full Flow
Media: Paper
Height: 4.354
Outer Diameter Top: 3.663
Outer Diameter Bottom: Closed
Thread Size: 20X1.5 MM
By-Pass Valve Setting-PSI: 16
Anti-Drain Back Valve: Yes
Beta Ratio: 2/20=10/25
Burst Pressure-PSI: 280
Max Flow Rate: 9-11 GPM
Nominal Micron Rating: 21

Gasket Diameters
Number O.D. I.D. Thk.
Attached 2.834 2.462 0.200

 

[Corvette Owner]

WHAT, surely this is a typo, by-pass valve setting of 16 psi ?!!! Way too low.

My Corvette has an in-block bypass setting of 72 psi !

 

[Gary Allan]

That's an oil pump relief setting. Your in block filter bypass can be anywhere from (iirc) 7-30 depending on if the cooler option is in use.

 

[Defiance665]

Originally Posted By: Gary Allan
The bypass setting is a tick higher, but this is longer with the same diameter.

Part Number: 51324
UPC Number: 765809513242
Principal Application: Small GM/Isuzu Diesels (81-83), Chevrolet Corvette (91-95), Ford/Mazda Diesel (83-87), Dodge/Mitsubishi Diesel PUs (83-84), Mitsubishi Fuso Trucks
All Applications
Style: Spin-On Lube Filter
Service: Lube
Type: Full Flow
Media: Paper
Height: 4.354
Outer Diameter Top: 3.663
Outer Diameter Bottom: Closed
Thread Size: 20X1.5 MM
By-Pass Valve Setting-PSI: 16
Anti-Drain Back Valve: Yes
Beta Ratio: 2/20=10/25
Burst Pressure-PSI: 280
Max Flow Rate: 9-11 GPM
Nominal Micron Rating: 21

Gasket Diameters
Number O.D. I.D. Thk.
Attached 2.834 2.462 0.200


Thanks, I was expecting a reply to take longer. If I would of waited half an hour it would of got that filter this time...
Oh well, Ill know what one to get next time.