To get the 5R110 to shift I'm using the Ford oem TCM and PCM and 13 sensors off the 6.4 to give the two computers the signals they're looking for. The most important sensors are TPS, RPM, boost, maf, intake temp, fuel temp, coolant temp, oil temp and vehicle speed The rest is mainly for monitoring systems. I'm tuning the transmission with HPTuners to set the shift points, it's basically RPM and vehicle speed that is changed. I have a lot to learn with HPtuners, but will go step by step until all the shifts are to my liking. I've tuned out the check engine light as well as the wrench light which is a good start. I'm now turning up the governor to 3200 RPM and putting the larger injectors in as this will aid the 5R110 in shifting as well.