Another 4L60E build with questions

[jamyers63]

Installed the .076" steels and 7 frictions, and got (after air seating the clutches) .022 on one side and .023 on the other. So pulled the apply "basket" out and took some off the ends of the fingers to level it up, and now the 3-4 clutch is right at .025 all the way around.

New sonnax release springs as well. Checked total end play again, and its steady at .011".

Now on to the valve body - but dang it gets hot after 11am!

 

[clinebarger]

Good for you leveling the clutch pack